これを検索してつぎの対策を考える。とにかく、もう起動できる直前に感じる 0007名無しQ(・∀・)ノ゜サァン!!2021/04/17(土) 20:52:47.52ID:BK9qZoUj ようやく、やる気が出て、再度、マシンを組み、BIOS のsata まわりをいじって、セーフモード起動すると、 ://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03315272 [Microsoft Windows Server 2003-サーバーが通常モードでスプラッシュ画面でハングし、セーフモードでACPITABL.DATを停止する]
このページが一番わかりやすかった。
Issue [問題] >A Windows 2003 server hangs at the Splash Screen when booted in Normal Mode. [通常モードで起動すると、Windows2003サーバーがスプラッシュ画面でハングします。]
同じですが、自分の場合、ストップエラーが。
>As a troubleshooting step, the server is always booted in Safe mode. [トラブルシューティング手順として、サーバーは常にセーフモードで起動されます。] Here while loading binaries, it halts at ACPITABL.DAT and does not boot any further. [ここで、バイナリのロード中は、ACPITABL.DATで停止し、それ以上起動しません。]
This is a behavior which could be seen due to many reasons, namely File System Corruption, BIOS/Firmware issues, SAN Configuration or driver issues. [これは、ファイルシステムの破損、BIOS /ファームウェアの問題、SAN構成、またはドライバーの問題など、多くの理由で発生する可能性のある動作です。]
For recovery, implement the following steps: [回復するには、次の手順を実行します。]
Unplug any external devices and storage cables. [外部デバイスとストレージケーブルをすべて取り外します。]
Update BIOS/Firmware. [BIOS /ファームウェアを更新します。]
Boot into Recovery Console and run: [回復コンソールを起動して、以下を実行します。]
C:\>chkdsk /r C: [C:\\> chkdsk / r C:]
<<回復コンソールで chkdsk /r C: せよとのこと。
<<つぎに
<< Perform an Inplace Upgrade. [インプレースアップグレードを実行します。]
インプレースアップグレード(たぶん修復セットアップのことと思う)
----------------------------------
手元にxp CD があるので、回復コンソールはできるけど、2003CD は作成しないと、ない。とりあえず、回復コンソールで chkdsk だけしようと思う。 0008名無しQ(・∀・)ノ゜サァン!!2021/04/17(土) 20:53:54.76ID:BK9qZoUj 久しぶり。最近はひじょうに長時間ノーパソに取り組んでいる。まだわからないが、元の富士通ウイン10はバックアップも残さずきっぱり捨てる可能性が高い。ウイン8.1を入れる可能性が高い。HDD からデータサルベージの方は、止まってるWWW
jin@kyo:~$ cd /home/jin/chroot/jdim jin@kyo:~/chroot/jdim$ sudo git checkout master Already on 'master' Your branch is up to date with 'origin/master'.
The default repair of the Boot-Repair utility would not act on the MBR. Additional repair would be performed: restore-efi-backups ------------------------------------ GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. 0066名無しQ(・∀・)ノ゜サァン!!2021/04/29(木) 00:07:11.15ID:Tu7fHwcY やはり、最適なメール整理かきこみ環境を作るところから。naho復元。 0067名無しQ(・∀・)ノ゜サァン!!2021/04/29(木) 00:34:40.85ID:Tu7fHwcY いまはdebianブートできない緊急事態だ。細部はほっとけ。ヤサカ+gmail まとめ作業を環境を作った。
File system: vfat Boot sector type: Windows 8/2012: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot/grub/grub.cfg /syslinux.cfg /efi/BOOT/grubx64.efi
================================ 0 OS detected =================================
============================ Architecture/Host Info ============================
CPU architecture: 64-bit Live-session OS is Ubuntu 64-bit (Boot-Repair-Disk 64bit 20200604, bionic, x86_64) 0085名無しQ(・∀・)ノ゜サァン!!2021/05/08(土) 22:24:16.47ID:fjoUCuYi ===================================== UEFI ===================================== BIOS is EFI-compatible, and is setup in EFI-mode for this live-session. SecureBoot disabled.
Disk sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors Disk identifier: E39F3456-018E-4560-B7C9-474678E2B7C6 Start End Sectors Size Type sda1 2048 391167 389120 190M EFI System sda2 391168 620947455 620556288 295.9G Linux filesystem sda3 620947456 625141759 4194304 2G Linux swap Disk sdb: 14.5 GiB, 15571353600 bytes, 30412800 sectors Disk identifier: D864A8D0-3C6E-41DA-AB06-D9329C9E0658 Start End Sectors Size Type sdb1 2048 30412766 30410719 14.5G Microsoft basic data Disk zram0: 852.3 MiB, 893652992 bytes, 218177 sectors
$ 0108名無しQ(・∀・)ノ゜サァン!!2021/05/22(土) 20:50:26.00ID:lnwwuAqG $ su - パスワード: # /usr/bin/nmcli device status DEVICE TYPE STATE CONNECTION wlan0 wifi 接続済み lo loopback 管理無し -- # 0109名無しQ(・∀・)ノ゜サァン!!2021/05/22(土) 20:58:26.44ID:lnwwuAqG # rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no
# /usr/bin/ip a
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 略
# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no
# ip link set wlan0 up # iw dev wlan0 scan | grep SSID SSID: 略 0110名無しQ(・∀・)ノ゜サァン!!2021/05/22(土) 21:07:58.00ID:lnwwuAqG $ su - パスワード: # apt-get install --reinstall linux-headers-$(uname -r) build-essential dkms git パッケージリストを読み込んでいます... 完了 依存関係ツリーを作成しています 状態情報を読み取っています... 完了 アップグレード: 0 個、新規インストール: 0 個、再インストール: 4 個、削除: 0 個、保留: 12 個。 6,721 kB のアーカイブを取得する必要があります。 この操作後に追加で 0 B のディスク容量が消費されます。 取得:1 http://deb.debian.org/debian buster/main amd64 build-essential amd64 12.6 [7,576 B] 取得:2 http://deb.debian.org/debian buster/main amd64 dkms all 2.6.1-4 [74.4 kB] 取得:3 http://deb.debian.org/debian buster/main amd64 git amd64 1:2.20.1-2+deb10u3 [5,633 kB] 取得:4 http://deb.debian.org/debian buster/main amd64 linux-headers-4.19.0-16-amd64 amd64 4.19.181-1 [1,006 kB] 6,721 kB を 6秒 で取得しました (1,109 kB/s) /tmp/timeshift-autosnap-apt-timestamp not found! Using lastSnapshot=0 Rsyncing /boot into the filesystem before the call to timeshift. Rsyncing /boot/efi into the filesystem before the call to timeshift. Using system disk as snapshot device for creating snapshots in BTRFS mode
/dev/sda2 is mounted at: /run/timeshift/backup, options: rw,relatime,space_cache,subvolid=5,subvol=/
Creating new backup...(BTRFS) Saving to device: /dev/sda2, mounted at path: /run/timeshift/backup Created directory: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-05-22_21-05-11 Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-05-22_21-05-11/@ Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-05-22_21-05-11/@home Created control file: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-05-22_21-05-11/info.json BTRFS Snapshot saved successfully (0s) Tagged snapshot '2021-05-22_21-05-11': ondemand ------------------------------------------------------------------------------ (データベースを読み込んでいます ... 現在 261608 個のファイルとディレクトリがインストールされています。) .../build-essential_12.6_amd64.deb を展開する準備をしています ... build-essential (12.6) で (12.6 に) 上書き展開しています ... .../archives/dkms_2.6.1-4_all.deb を展開する準備をしています ... dkms (2.6.1-4) で (2.6.1-4 に) 上書き展開しています ... .../git_1%3a2.20.1-2+deb10u3_amd64.deb を展開する準備をしています ... git (1:2.20.1-2+deb10u3) で (1:2.20.1-2+deb10u3 に) 上書き展開しています ... .../linux-headers-4.19.0-16-amd64_4.19.181-1_amd64.deb を展開する準備をしています ... linux-headers-4.19.0-16-amd64 (4.19.181-1) で (4.19.181-1 に) 上書き展開しています ... dkms (2.6.1-4) を設定しています ... git (1:2.20.1-2+deb10u3) を設定しています ... linux-headers-4.19.0-16-amd64 (4.19.181-1) を設定しています ... build-essential (12.6) を設定しています ... man-db (2.8.5-2) のトリガを処理しています ... localepurge: Disk space freed in /usr/share/locale: 4892 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB
Kernel preparation unnecessary for this kernel. Skipping...
Building module: cleaning build area... make -j3 KERNELRELEASE=4.19.0-16-amd64 -C /lib/modules/4.19.0-16-amd64/build M=/var/lib/dkms/8192cu/1.11/build...........(bad exit status: 2) Error! Bad return status for module build on kernel: 4.19.0-16-amd64 (x86_64) Consult /var/lib/dkms/8192cu/1.11/build/make.log for more information.
$ 末尾3行好像出现了错误。 0139名無しQ(・∀・)ノ゜サァン!!2021/05/25(火) 23:36:18.37ID:80xr1K6C $ cat /var/lib/dkms/8192cu/1.11/build/make.log DKMS make.log for 8192cu-1.11 for kernel 4.19.0-16-amd64 (x86_64) 2021年 5月 25日 火曜日 23:19:12 JST make: ディレクトリ '/usr/src/linux-headers-4.19.0-16-amd64' に入ります CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_cmd.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_security.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_debug.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_io.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_ioctl_query.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_ioctl_set.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_ieee80211.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_mlme.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_mlme_ext.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_wlan_util.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_pwrctrl.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_rf.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_recv.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_sta_mgt.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_ap.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_xmit.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_p2p.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_tdls.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_br_ext.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_iol.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/rtw_sreset.o CC [M] /var/lib/dkms/8192cu/1.11/build/core/efuse/rtw_efuse.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/hal_intf.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/hal_com.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/dm.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/rtl8192c_hal_init.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/rtl8192c_phycfg.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/rtl8192c_rf6052.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/rtl8192c_dm.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/rtl8192c_rxdesc.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/rtl8192c_cmd.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/usb/usb_halinit.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/usb/rtl8192cu_led.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/usb/rtl8192cu_xmit.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/usb/rtl8192cu_recv.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/usb/usb_ops_linux.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/rtl8192c_sreset.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/rtl8192c_xmit.o CC [M] /var/lib/dkms/8192cu/1.11/build/hal/rtl8192c/usb/Hal8192CUHWImg.o CC [M] /var/lib/dkms/8192cu/1.11/build/os_dep/osdep_service.o CC [M] /var/lib/dkms/8192cu/1.11/build/os_dep/linux/os_intfs.o CC [M] /var/lib/dkms/8192cu/1.11/build/os_dep/linux/usb_intf.o CC [M] /var/lib/dkms/8192cu/1.11/build/os_dep/linux/usb_ops_linux.o CC [M] /var/lib/dkms/8192cu/1.11/build/os_dep/linux/ioctl_linux.o 0140名無しQ(・∀・)ノ゜サァン!!2021/05/26(水) 00:20:07.07ID:ggLbE7Zahttps://luppeng.wordpress.com/2019/08/31/realtek-8192eu-rtl8192eu-driver-not-compatible-with-centos-7-6-kernel/
Realtek 8192EU (RTL8192EU) Driver Not Compatible with CentOS 7.6 Kernel
> After attempting for approximately 12 hours, I have come to the understanding that unless the kernel is upgraded, or the existing wireless chipset driver files are updated (tried 6 different repos), it is not possible to compile and install it on CentOS 7.6. This is due to the ioctl_cfg80211.c file being incompatible with the 3.10.0-957 kernel version that CentOS 7.6 uses.
These links (link1, link2) explain that while the CentOS 7.6 kernel version is 3.10.0, Red Hat has backported large portions of the network stack from more recent 4.x kernels. 经过大约12个小时的尝试,我终于明白,除非内核升级,或者现有的无线芯片组驱动程序文件更新(尝试了6种不同的repos),否则不可能在CentOS 7.6上编译和安装它。这是因为ioctl_cfg80211.c文件与CentOS 7.6使用的3.10.0-957内核版本不兼容。 这些链接(link1,link2)解释说,虽然CentOS 7.6内核版本是3.10.0,但Red Hat从最近的4.x内核中向后移植了大部分网络堆栈。 这篇文章的其余部分记录了我的过程,希望能帮助任何遇到同样问题的人。
<<自分の場合はどうしたらいいのか、読み取れませんでした。 0141名無しQ(・∀・)ノ゜サァン!!2021/05/26(水) 20:24:53.17ID:ggLbE7Zahttps://github.com/pvaret/rtl8192cu-fixes >The new rtl8xxxu driver initially introduced in kernel 4.4 works mostly well these days, and you should give it a try before trying this repository. ということで、以下を試しました。
>Be sure to set the options for DMA aggregation and dual-band 2.4 GHz: 请确保设置DMA聚合和双频2.4 GHz的选项:
代码: 全选 echo options rtl8xxxu ht40_2g=1 dma_aggregation=1 | sudo tee /etc/modprobe.d/rtl8xxxu.conf then reboot.
その結果、NetworkManager小程序的扇型は2本しかないのは同じだが、speed test で 下り50Mbps 上り6.5Mbps 出るようになった。以前の倍以上の数値です。しかし、
echo options rtl8xxxu ht40_2g=1 dma_aggregation=1 | sudo tee /etc/modprobe.d/rtl8xxxu.conf の効果なのかは不明です。とはいえ、この速度は十分速いらしいので、いったんここで満足します。 0142名無しQ(・∀・)ノ゜サァン!!2021/05/28(金) 09:51:28.70ID:62Mcwb6B # sudo lightdm –-test-mode --debug [+0.01s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.01s] DEBUG: Starting Light Display Manager 1.26.0, UID=0 PID=2396 [+0.01s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d [+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf [+0.01s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d [+0.01s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d [+0.01s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf [+0.01s] DEBUG: Using Xephyr for X servers [+0.01s] DEBUG: Registered seat module local [+0.01s] DEBUG: Registered seat module xremote [+0.01s] DEBUG: Registered seat module unity [+0.01s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Monitoring logind for seats [+0.02s] DEBUG: New seat added from logind: seat0 [+0.02s] DEBUG: Seat seat0: Loading properties from config section Seat:* [+0.02s] DEBUG: Seat seat0: Starting [+0.02s] DEBUG: Seat seat0: Creating user session [+0.02s] DEBUG: Loading users from org.freedesktop.Accounts [+0.02s] DEBUG: User /org/freedesktop/Accounts/User1000 added [+0.04s] DEBUG: Seat seat0: Creating display server of type x [+0.04s] DEBUG: posix_spawn avoided (fd close requested) [+0.05s] DEBUG: Using VT 7 [+0.05s] DEBUG: Seat seat0: Starting local X display on VT 7 [+0.05s] DEBUG: XServer 1: Logging to /var/log/lightdm/x-1.log [+0.05s] DEBUG: XServer 1: Can't launch X server Xephyr, not found in path [+0.05s] DEBUG: XServer 1: X server stopped [+0.05s] DEBUG: Releasing VT 7 [+0.05s] DEBUG: Seat seat0: Display server stopped [+0.05s] DEBUG: Seat seat0: Can't create display server for automatic login [+0.05s] DEBUG: Seat seat0: Session stopped [+0.05s] DEBUG: Seat seat0: Stopping display server, no sessions require it [+0.05s] DEBUG: Seat seat0: Creating greeter session [+0.05s] DEBUG: Seat seat0: Creating display server of type x [+0.05s] DEBUG: Using VT 7 [+0.05s] DEBUG: Seat seat0: Starting local X display on VT 7 [+0.05s] DEBUG: XServer 1: Logging to /var/log/lightdm/x-1.log [+0.05s] DEBUG: XServer 1: Can't launch X server Xephyr, not found in path [+0.05s] DEBUG: XServer 1: X server stopped [+0.05s] DEBUG: Releasing VT 7 [+0.05s] DEBUG: Seat seat0: Display server stopped [+0.05s] DEBUG: Seat seat0: Can't create display server for greeter [+0.05s] DEBUG: Seat seat0: Session stopped [+0.05s] DEBUG: Seat seat0: Stopping display server, no sessions require it [+0.05s] DEBUG: Seat seat0: Stopping [+0.05s] DEBUG: Seat seat0: Stopped [+0.05s] DEBUG: Failed to start seat: seat0 # 0143名無しQ(・∀・)ノ゜サァン!!2021/05/28(金) 09:54:09.26ID:62Mcwb6B $ journalctl -p 3 -- Logs begin at Fri 2021-05-28 09:14:28 JST, end at Fri 2021-05-28 09:51:00 JST 5月 28 09:14:30 kyo kernel: kvm: disabled by bios 5月 28 09:14:30 kyo kernel: kvm: disabled by bios 5月 28 09:14:30 kyo kernel: kvm: disabled by bios 5月 28 09:14:42 kyo wpa_supplicant[479]: bgscan simple: Failed to enable signal 5月 28 09:16:17 kyo systemd[1]: Failed to start Light Display Manager. 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to open /proc/sys/net/ 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to set IPv4 unicast in 5月 28 09:50:35 kyo wpa_supplicant[479]: dbus: wpa_dbus_property_changed: no pr 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to open /proc/sys/net/ 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to set IPv4 unicast in 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to open /proc/sys/net/ 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to set IPv4 unicast in 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to open /proc/sys/net/ 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to set IPv4 unicast in 5月 28 09:50:45 kyo [2527]: /usr/lib/systemd/system-sleep/xkeyboard failed with 5月 28 09:50:49 kyo wpa_supplicant[479]: bgscan simple: Failed to enable signal lines 1-17/17 (END)...skipping... -- Logs begin at Fri 2021-05-28 09:14:28 JST, end at Fri 2021-05-28 09:51:00 JST. -- 5月 28 09:14:30 kyo kernel: kvm: disabled by bios 5月 28 09:14:30 kyo kernel: kvm: disabled by bios 5月 28 09:14:30 kyo kernel: kvm: disabled by bios 5月 28 09:14:42 kyo wpa_supplicant[479]: bgscan simple: Failed to enable signal strength monitoring 5月 28 09:16:17 kyo systemd[1]: Failed to start Light Display Manager. 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to set IPv4 unicast in multicast filter 5月 28 09:50:35 kyo wpa_supplicant[479]: dbus: wpa_dbus_property_changed: no property SessionLength in object 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to set IPv4 unicast in multicast filter 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to set IPv4 unicast in multicast filter 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i 5月 28 09:50:35 kyo wpa_supplicant[479]: nl80211: Failed to set IPv4 unicast in multicast filter 5月 28 09:50:45 kyo [2527]: /usr/lib/systemd/system-sleep/xkeyboard failed with exit status 1. 5月 28 09:50:49 kyo wpa_supplicant[479]: bgscan simple: Failed to enable signal strength monitoring ~ 0144名無しQ(・∀・)ノ゜サァン!!2021/05/28(金) 10:32:43.33ID:62Mcwb6B $ systemctl list-unit-files --state=enabled UNIT FILE STATE accounts-daemon.service enabled anacron.service enabled apparmor.service enabled autovt@.service enabled avahi-daemon.service enabled binfmt-support.service enabled bluetooth.service enabled console-setup.service enabled cron.service enabled dbus-org.bluez.service enabled dbus-org.freedesktop.Avahi.service enabled dbus-org.freedesktop.ModemManager1.service enabled dbus-org.freedesktop.nm-dispatcher.service enabled dbus-org.freedesktop.timesync1.service enabled getty@.service enabled haveged.service enabled keyboard-setup.service enabled ModemManager.service enabled network-manager.service enabled networking.service enabled NetworkManager-dispatcher.service enabled NetworkManager-wait-online.service enabled lines 1-23...skipping... UNIT FILE STATE accounts-daemon.service enabled anacron.service enabled apparmor.service enabled autovt@.service enabled avahi-daemon.service enabled binfmt-support.service enabled bluetooth.service enabled console-setup.service enabled cron.service enabled dbus-org.bluez.service enabled dbus-org.freedesktop.Avahi.service enabled dbus-org.freedesktop.ModemManager1.service enabled dbus-org.freedesktop.nm-dispatcher.service enabled dbus-org.freedesktop.timesync1.service enabled getty@.service enabled haveged.service enabled keyboard-setup.service enabled ModemManager.service enabled network-manager.service enabled networking.service enabled NetworkManager-dispatcher.service enabled NetworkManager-wait-online.service enabled NetworkManager.service enabled pppd-dns.service enabled lines 1-25 0145名無しQ(・∀・)ノ゜サァン!!2021/05/28(金) 10:35:44.12ID:62Mcwb6B $ sudo su root@kyo:/home/jin# systemctl disable bluetooth.service Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install. Executing: /lib/systemd/systemd-sysv-install disable bluetooth Removed /etc/systemd/system/bluetooth.target.wants/bluetooth.service. Removed /etc/systemd/system/dbus-org.bluez.service. root@kyo:/home/jin# 0146名無しQ(・∀・)ノ゜サァン!!2021/05/28(金) 12:13:11.75ID:62Mcwb6B $ sudo sed -i '156s/$/\\/' /usr/src/8192cu-1.11/os_dep/linux/usb_intf.c
$ sudo dkms install 8192cu/1.11
Kernel preparation unnecessary for this kernel. Skipping...
Building module: cleaning build area... make -j3 KERNELRELEASE=4.19.0-16-amd64 -C /lib/modules/4.19.0-16-amd64/build M=/var/lib/dkms/8192cu/1.11/build............ cleaning build area...
DKMS: build completed.
8192cu.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/4.19.0-16-amd64/updates/dkms/
depmod.............
Backing up initrd.img-4.19.0-16-amd64 to /boot/initrd.img-4.19.0-16-amd64.old-dkms Making new initrd.img-4.19.0-16-amd64 (If next boot fails, revert to initrd.img-4.19.0-16-amd64.old-dkms image) update-initramfs......(bad exit status: 1)
Status: Before uninstall, this module version was ACTIVE on this kernel.
8192cu.ko: - Uninstallation - Deleting from: /lib/modules/4.19.0-16-amd64/updates/dkms/ rmdir: 'updates/dkms' を削除できません: ディレクトリは空ではありません - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version.
depmod...
update-initramfs......(bad exit status: 1) Warning: There was a problem remaking your initrd. You must manually remake it before booting into this kernel.
DKMS: uninstall completed. Error! Problems with mkinitrd detected. Automatically uninstalling this module. DKMS: Install Failed (mkinitrd problems). Module rolled back to built state.
jin@kyo:~$ '/home/jin/Downloads/LosslessCut-linux/losslesscut' [3412:0528/140025.020415:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /home/jin/Downloads/LosslessCut-linux/chrome-sandbox is owned by root and has mode 4755. Trace/breakpoint trap jin@kyo:~$ sudo -s root@kyo:/home/jin# '/home/jin/Downloads/LosslessCut-linux/losslesscut' [3479:0528/140215.857797:FATAL:electron_main_delegate.cc(254)] Running as root without --no-sandbox is not supported. See https://crbug.com/638180. Trace/breakpoint trap ここまで意味わからず。調べるのめんどくさい。以下で起動。
root@kyo:/home/jin# '/home/jin/Downloads/LosslessCut-linux/losslesscut' --no-sandbox Current version 3.36.0 Newest version 3.36.0 0151名無しQ(・∀・)ノ゜サァン!!2021/05/28(金) 14:31:39.48ID:62Mcwb6B 参考ページ mv LosslessCut-linux-x64/ /opt/LosslessCut/ 修正 mv LosslessCut-linux/ /opt/LosslessCut/ ------------------------------- mv icon.png /opt/LosslessCut/resources/ 0152名無しQ(・∀・)ノ゜サァン!!2021/05/28(金) 14:37:41.63ID:62Mcwb6B jin@kyo:~$ sudo -s
losslesscut を端末に放り込んで
root@kyo:/home/jin# '/opt/LosslessCut/losslesscut' [4223:0528/142402.078376:FATAL:electron_main_delegate.cc(254)] Running as root without --no-sandbox is not supported. See https://crbug.com/638180. Trace/breakpoint trap
root@kyo:/home/jin# exit exit jin@kyo:~$ '/opt/LosslessCut/losslesscut' [4401:0528/142617.530537:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /opt/LosslessCut/chrome-sandbox is owned by root and has mode 4755. Trace/breakpoint trap
# apt install libfaudio0 パッケージリストを読み込んでいます... 完了 依存関係ツリーを作成しています 状態情報を読み取っています... 完了 以下の追加パッケージがインストールされます: libfaudio0:i386 libstb0:i386 以下のパッケージが新たにインストールされます: libstb0:i386 以下のパッケージはアップグレードされます: libfaudio0 libfaudio0:i386 アップグレード: 2 個、新規インストール: 1 個、削除: 0 個、保留: 12 個。 481 kB 中 0 B のアーカイブを取得する必要があります。 この操作後に追加で 753 kB のディスク容量が消費されます。 続行しますか? [Y/n] y 0176名無しQ(・∀・)ノ゜サァン!!2021/05/31(月) 21:22:40.75ID:4sdqybbB /tmp/timeshift-autosnap-apt-timestamp not found! Using lastSnapshot=0 Rsyncing /boot into the filesystem before the call to timeshift. Rsyncing /boot/efi into the filesystem before the call to timeshift. Using system disk as snapshot device for creating snapshots in BTRFS mode
/dev/sda2 is mounted at: /run/timeshift/backup, options: rw,relatime,space_cache,subvolid=5,subvol=/
Creating new backup...(BTRFS) Saving to device: /dev/sda2, mounted at path: /run/timeshift/backup Created directory: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-05-31_21-19-32 Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-05-31_21-19-32/@ Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-05-31_21-19-32/@home Created control file: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-05-31_21-19-32/info.json BTRFS Snapshot saved successfully (2s) Tagged snapshot '2021-05-31_21-19-32': ondemand ------------------------------------------------------------------------------ changelog を読み込んでいます... 完了 (データベースを読み込んでいます ... 現在 261609 個のファイルとディレクトリがインストールされています。) .../libfaudio0_21.02-1~bpo10+1_i386.deb を展開する準備をしています ... libfaudio0:amd64 (19.07-0~bionic) を設定削除しています ... libfaudio0:i386 (21.02-1~bpo10+1) で (19.07-0~bionic に) 上書き展開しています ... .../libfaudio0_21.02-1~bpo10+1_amd64.deb を展開する準備をしています ... libfaudio0:amd64 (21.02-1~bpo10+1) で (19.07-0~bionic に) 上書き展開しています ... 以前に未選択のパッケージ libstb0:i386 を選択しています。 .../libstb0_0.0~git20180212.15.e6afb9c-1_i386.deb を展開する準備をしています ... libstb0:i386 (0.0~git20180212.15.e6afb9c-1) を展開しています... libfaudio0:amd64 (21.02-1~bpo10+1) を設定しています ... libstb0:i386 (0.0~git20180212.15.e6afb9c-1) を設定しています ... libfaudio0:i386 (21.02-1~bpo10+1) を設定しています ... libc-bin (2.28-10) のトリガを処理しています ... localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB
以下のパッケージが新たにインストールされます: google-drive-ocamlfuse アップグレード: 0 個、新規インストール: 1 個、削除: 0 個、保留: 10 個。 999 kB のアーカイブを取得する必要があります。 この操作後に追加で 4,448 kB のディスク容量が消費されます。 取得:1 http://ppa.launchpad.net/alessandro-strada/ppa/ubuntu xenial/main amd64 google-drive-ocamlfuse amd64 0.7.26-0ubuntu1~ubuntu16.04.1 [999 kB] 999 kB を 2秒 で取得しました (501 kB/s) /tmp/timeshift-autosnap-apt-timestamp not found! Using lastSnapshot=0 Rsyncing /boot into the filesystem before the call to timeshift. Rsyncing /boot/efi into the filesystem before the call to timeshift. Using system disk as snapshot device for creating snapshots in BTRFS mode
/dev/sda2 is mounted at: /run/timeshift/backup, options: rw,relatime,space_cache,subvolid=5,subvol=/
Creating new backup...(BTRFS) Saving to device: /dev/sda2, mounted at path: /run/timeshift/backup Created directory: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-06-02_20-19-21 Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-06-02_20-19-21/@ Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-06-02_20-19-21/@home Created control file: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-06-02_20-19-21/info.json BTRFS Snapshot saved successfully (0s) Tagged snapshot '2021-06-02_20-19-21': ondemand ------------------------------------------------------------------------------ 以前に未選択のパッケージ google-drive-ocamlfuse を選択しています。 (データベースを読み込んでいます ... 現在 261608 個のファイルとディレクトリがインストールされています。) .../google-drive-ocamlfuse_0.7.26-0ubuntu1~ubuntu16.04.1_amd64.deb を展開する準備をしています ... google-drive-ocamlfuse (0.7.26-0ubuntu1~ubuntu16.04.1) を展開しています... google-drive-ocamlfuse (0.7.26-0ubuntu1~ubuntu16.04.1) を設定しています ... man-db (2.8.5-2) のトリガを処理しています ... localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB
*スパイウェア、アドウェア、キーストロークロガー*ハードウェアの競合Seagate SeaToolsソフトウェアは、ロードが簡単で使いやすいです。次の手順は、この新しいソフトウェアツールを最大限に活用するのに役立ちます。この製品またはその他のシーゲイトのソフトウェアまたはサービス製品について質問がある場合は、システムのサプライヤにお問い合わせください。 0216名無しQ(・∀・)ノ゜サァン!!2021/07/09(金) 16:38:34.88ID:q5y5bSQa 2. Using SeaTools Do not remove the SeaTools CD while the tests are running. Run Seagate SeaTools ==================== A. Reboot your system Insert the SeaTools CD and reboot or power on your computer. The system will boot to the FreeDOS operating system. If your system fails to boot, see the Troubleshooting section #5 later in this file. 2.SeaToolsの使用
ということで。 0232名無しQ(・∀・)ノ゜サァン!!2021/07/12(月) 11:45:09.30ID:wZ7igMvc $ sudo timeshift --list ------------------------------------------------------------------------------ 0 > 2021-06-22_22-32-03 O $ sudo apt purge firmware-realtek 1 > 2021-07-01_19-03-38 O {timeshift-autosnap-apt} {created before call to APT} 2 > 2021-07-01_19-16-18 O Before restoring '2021-06-22 22:32:03' 3 > 2021-07-01_19-19-37 O {timeshift-autosnap-apt} {created before call to APT} 4 > 2021-07-12_10-26-04 O {timeshift-autosnap-apt} {created before call to APT} 5 > 2021-07-12_10-50-38 O Before restoring '2021-07-12 10:26:04' 6 > 2021-07-12_11-02-06 B
Fix All(すべてを修復) Short Drive Self Test(短時間ドライブ自己テスト)(20〜90秒) Drive Information(ドライブ情報) Short Generic(ショート・リード・テスト) Long Generic(ロング・リード・テスト)(1%ずつ進行するため、完了までに数時間かかることがある) 0239名無しQ(・∀・)ノ゜サァン!!2021/07/12(月) 17:31:24.38ID:wZ7igMvc Short Drive Self Test(短時間ドライブ自己テスト)(DST) を起動すると、大部分のドライブは、ハードディスク・ドライブのファームウェアに組み込まれた診断ルーチンを実行します。DSTでは、データは完全に保護されます。
jin@kyo:~$ cd /var/cache/apt/archives jin@kyo:/var/cache/apt/archives$ ls -a . .. lock partial jin@kyo:/var/cache/apt/archives$ cd lock bash: cd: lock: ディレクトリではありません jin@kyo:/var/cache/apt/archives$ cd partial bash: cd: partial: 許可がありません jin@kyo:/var/cache/apt/archives$ 0245名無しQ(・∀・)ノ゜サァン!!2021/07/13(火) 00:37:31.76ID:M6cMVy35 多くの容量を占めていて現在必要のないパッケージを削除する (アップグレード後にいつでもインストールし直せます)。popularity-contest をインストールしていれば、popcon-largest-unused を使うことにより、容量の多くを占めていて使うことのないパッケージの一覧が得られます https://qiita.com/niwasawa/items/956573e4a72a04035dc2 使っていない Debian パッケージを popcon-largest-unused コマンドで調査する
# popcon-largest-unused warning: Missing required file /var/log/popularity-contest. info: Run 'popularity-contest > /var/log/popularity-contest' to generate it.
[ OK ] Mounted Kernel Debug File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. Starting Create System Users... Starting Load/Save Random Seed... [ OK ] Started Journal Service. [ OK ] Started udev Coldplug all Devices. Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. --続きます--(0%)
boot.log とはなにか?はわかったが、これも異常を発見できない 0265名無しQ(・∀・)ノ゜サァン!!2021/07/14(水) 17:35:10.73ID:kaPvappf 7月 14 17:01:19 kyo systemd-udevd[269]: Error running install command for rtlwifi 7月 14 17:01:31 kyo wpa_supplicant[571]: bgscan simple: Failed to enable signal strength monitoring 7月 14 17:04:43 kyo dhclient[580]: receive_packet failed on wlan0: Network is down 7月 14 17:04:43 kyo wpa_supplicant[571]: dbus: wpa_dbus_property_changed: no property SessionLength in object 7月 14 17:04:43 kyo wpa_supplicant[571]: nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i 7月 14 17:04:43 kyo wpa_supplicant[571]: nl80211: Failed to set IPv4 unicast in multicast filter 7月 14 17:04:44 kyo wpa_supplicant[571]: nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i 7月 14 17:04:44 kyo wpa_supplicant[571]: nl80211: Failed to set IPv4 unicast in multicast filter 7月 14 17:04:44 kyo wpa_supplicant[571]: nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i 7月 14 17:04:44 kyo wpa_supplicant[571]: nl80211: Failed to set IPv4 unicast in multicast filter 7月 14 17:04:44 kyo systemd-udevd[1570]: Error running install command for rtlwifi 7月 14 17:04:47 kyo wpa_supplicant[571]: bgscan simple: Failed to enable signal strength monitoring 0266名無しQ(・∀・)ノ゜サァン!!2021/07/14(水) 17:42:28.25ID:kaPvappf / var/log内のすべてを削除すると、存在することが予想されるフォルダー(exim4、Apache2、apt、cups、mysql、sambaなど)が存在するため、非常に短い時間で大量のエラーメッセージが表示される可能性があります。もっと)。さらに、ログファイルが存在しない場合に作成されないサービスまたはアプリケーションがいくつかあります。彼らは少なくとも空のファイルが存在することを期待しています。ですから、あなたの質問への直接的な答えは、実際には"Do not do this !!!"です。
Error running install command for rtlwi bgscan simple: Failed to enable signal
復帰後 症状変化なし nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i nl80211: Failed to set IPv4 unicast in multicast filter Error running install command for rtlwifi
wpa_supplicant is started in the graphical target only because another [ wpa_supplicantは、別の理由でのみグラフィカルターゲットで開始されます] program activates it via D-Bus: [ プログラムはD-Busを介してそれをアクティブにします:] Another program that might activate wpa_supplicant is NetworkManager, [ wpa_supplicantをアクティブ化する可能性のある別のプログラムはNetworkManagerです。] but only when a Wi-Fi device is found. [ ただし、Wi-Fiデバイスが見つかった場合のみ。] So, if you isolate the [ だから、あなたが分離した場合] multi-user target and there is a Wi-Fi device managed by NM, [ マルチユーザーターゲットであり、NMによって管理されるWi-Fiデバイスがあります。] wpa_supplicant will be active. [ wpa_supplicantがアクティブになります。]
To have wpa_supplicant always running even if not requested by another [ 他の人から要求されていない場合でも、wpa_supplicantを常に実行する] program (like NM), you need to enable the service explicitly: [ プログラム(NMなど)では、サービスを明示的に有効にする必要があります。] 0281名無しQ(・∀・)ノ゜サァン!!2021/07/15(木) 10:53:54.12ID:SKALgUUg $ systemctl status wpa_supplicant ● wpa_supplicant.service - WPA supplicant Loaded: loaded (/lib/systemd/system/wpa_supplicant.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2021-07-15 10:40:36 JST; 12min ago Main PID: 570 (wpa_supplicant) Tasks: 1 (limit: 4121) Memory: 1.5M CGroup: /system.slice/wpa_supplicant.service └─570 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
7月 15 10:42:38 kyo wpa_supplicant[570]: nl80211: Failed to set IPv4 unicast in multicast filter 7月 15 10:42:38 kyo wpa_supplicant[570]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 7月 15 10:42:42 kyo wpa_supplicant[570]: wlan0: Trying to associate with 1c:b1:7f:ff:94:55 (SSID='WARPSTAR-52 7月 15 10:42:42 kyo wpa_supplicant[570]: wlan0: Associated with 1c:b1:7f:ff:94:55 7月 15 10:42:42 kyo wpa_supplicant[570]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 7月 15 10:42:42 kyo wpa_supplicant[570]: wlan0: WPA: Key negotiation completed with 1c:b1:7f:ff:94:55 [PTK=CC 7月 15 10:42:42 kyo wpa_supplicant[570]: wlan0: CTRL-EVENT-CONNECTED - Connection to 1c:b1:7f:ff:94:55 comple 7月 15 10:42:42 kyo wpa_supplicant[570]: bgscan simple: Failed to enable signal strength monitoring 7月 15 10:42:42 kyo wpa_supplicant[570]: wlan0: WPA: Group rekeying completed with 1c:b1:7f:ff:94:55 [GTK=CCM 7月 15 10:42:44 kyo wpa_supplicant[570]: wlan0: WPA: Group rekeying completed with 1c:b1:7f:ff:94:55 [GTK=CCM lines 1-19/19 (END) 0282名無しQ(・∀・)ノ゜サァン!!2021/07/15(木) 11:22:15.77ID:SKALgUUg # wpa_supplicant -B -i wlan0 -D wext -c /etc/wpa_supplicant/example.conf Successfully initialized wpa_supplicant Failed to open config file '/etc/wpa_supplicant/example.conf', error: No such file or directory Failed to read or parse configuration '/etc/wpa_supplicant/example.conf'.
Buster users are advised to compile their own kernel if they have the need to connect to enterprise networks (or use wpa_supplicant until upgrading to Bullseye). [バスターユーザーは、エンタープライズネットワークに接続する必要がある場合は、独自のカーネルをコンパイルすることをお勧めします(または、ブルズアイにアップグレードするまでwpa_supplicantを使用します)。] 0287名無しQ(・∀・)ノ゜サァン!!2021/07/21(水) 18:17:29.54ID:p+PInPWT 再開、中文つづき
Using A Live CD/USB To Fix Your Current System
Boot (using UEFI) into a live system, such as a DebianLive CD/USB or the Debian installer in rescue mode. [DebianLive CD / USBや [レスキューモードのDebianインストーラ] などのライブシステムを(UEFIを使用して)起動します。] 0288名無しQ(・∀・)ノ゜サァン!!2021/07/21(水) 18:39:37.58ID:p+PInPWT (You can verify that the system has booted using UEFI by checking for the existence of the directory /sys/firmware/efi or by running efibootmgr.)
Mount the broken system somewhere into the running filesystem.
[壊れたシステムを実行中のファイルシステムのどこかにマウントします。]
The exact details of how to do this depend on the particulars of your installation. [これを行う方法の正確な詳細は、インストールの詳細によって異なります。]
For example, for a system with an EFI partition on /dev/sdb1, an unencrypted /boot partition on /dev/sdb2, and a LUKS-encrypted / partition on /dev/sdb3, do:
[たとえば、/ dev / sdb1にEFIパーティション、/ dev / sdb2に暗号化されていない/ bootパーティション、および/ dev / sdb3にLUKSで暗号化された/パーティションがあるシステムの場合は次のようにします。] 0289名無しQ(・∀・)ノ゜サァン!!2021/07/23(金) 17:35:31.66ID:CcdB3hfU 2021年07月23日
1. wifi 2. uefi絡みの起動の問題 3. 新しい得たseatool
取り組む順序は、2から。16ギガusbメモリにrefinderがあるため、まずこの問題を解決。 0290名無しQ(・∀・)ノ゜サァン!!2021/07/23(金) 17:44:53.44ID:CcdB3hfU UEFI x GPT が性に合わないならCSM x MBRに戻せばいい 要領さえわかればそんなに難しくない Btrfsだとその辺の作業もやりやすい
--------------- 解釈 1,CSM x MBRで問題ない。2,変換作業でBtrfsが絡む 0291名無しQ(・∀・)ノ゜サァン!!2021/07/23(金) 18:00:39.14ID:CcdB3hfU imtrance がクロムffどちらでも正しく動作するときとしないときと 0292名無しQ(・∀・)ノ゜サァン!!2021/07/23(金) 18:14:31.84ID:CcdB3hfU 実験1 ブルスアイをmbrからgptに変換。 つぎに、 refind usb で起動しブルスアイ上から
Reinstall the grub-efi package "sudo apt-get install --reinstall grub-efi"
Put the debian bootloader in /boot/efi and create an appropriate entry in the computer NVRAM [Debianブートローダーを/boot/efiに置き、コンピューターのNVRAMに適切なエントリを作成] "sudo grub-install"
Re create a grub config file based on your disk partitioning schema [ディスクパーティションスキーマに基づいてgrub構成ファイルを再作成します] "sudo update-grub" 0293名無しQ(・∀・)ノ゜サァン!!2021/07/23(金) 18:17:33.59ID:CcdB3hfU コンピューターのNVRAMに適切なエントリを作成] "sudo apt-get install --reinstall grub-efi"
Details vary greatly from one EFI to another, but in all but some very ancient EFIs, BIOS-mode OSes are installed using a Compatibility Support Module (CSM), which is a sort of BIOS emulator for EFI firmware. 0297名無しQ(・∀・)ノ゜サァン!!2021/07/23(金) 21:59:36.83ID:CcdB3hfU CSMは、あなたがファームウェアのオプションを設定するか、ファームウェア自身がCSMを使用するかしないかのトリガーとなるものを検出したときに、オン/オフを切り替えることができます。 残念なことに、異なるEFI(したがってコンピュータ)が、両方がアクティブなときにどちらのブートモードを使用するかを決定する方法には、ほとんど標準化されていません。そのため、CSMは使い勝手が悪く、扱いにくいものとなっています。
とはいえ、異なるブートモードを使用するOSを管理するには、通常2つの方法があります。
----------------------
これにより、CSMは気性があり、<< 問題な表現だが、なんとなくわかる 0298名無しQ(・∀・)ノ゜サァン!!2021/07/23(金) 22:02:47.48ID:CcdB3hfU 内蔵ブートマネージャの使い方 -- すべてのEFIには何らかの内蔵ブートマネージャが用意されていますが、その使い方の詳細はマシンによって異なります。一般的には、コンピュータの電源を入れた直後に、ファンクションキー(通常はF8以上)、Del、Enterを押してブートマネージャにアクセスします。この操作により、ブートオプションのメニューが表示されます。これらの中には、EFIモードでコンピュータを起動するものと、BIOSモードで起動するものがあります。EFIエントリは通常、インストールしたOSの名前(ubuntuやWindowsブートマネージャなど)か、"UEFI "という文字列を含んでいます。BIOSエントリは、ハードディスクの名前のように、BIOSブートメディアを記述することが多いです。したがって、BIOSモードのWindowsとEFIモードのUbuntuを切り替えるには、ハードディスクを名前で選択するのと、ブートマネージャでubuntuというエントリを選択するのとでは、違いがあります。 0299名無しQ(・∀・)ノ゜サァン!!2021/07/23(金) 22:06:00.87ID:CcdB3hfU Using rEFInd -- My rEFInd boot manager is a standalone boot manager that can do something similar to what the EFI's boot manager can do, but it works in more-or-less the same way on any EFI-based computer. (Macs are an exception; the CSM in Macs is unique, and so rEFInd treats Macs differently.) By default, rEFInd's CSM support is inactive, so you won't see BIOS-mode boot options. If you uncomment the scanfor line in refind.conf and ensure that hdbios is among the options, you'll see a gray diamond-shaped icon for your hard disk, which will launch any BIOS-mode boot loader it contains. This is in addition to whatever EFI-mode boot loaders the disk contains. Thus, you can switch between BIOS-mode and EFI-mode boot loaders.
n@RY:~$ timeshift-launcher First run mode (config file not found) 選択されたデフォルトのスナップショットタイプ: BTRFS アプリの設定が読み込まれました: /etc/timeshift/timeshift.json Mounted '/dev/sda2' at '/run/timeshift/backup' 選択されたデフォルトのスナップショットデバイス: /dev/sda2
二重に書き込まれたが シェルスクリプトの実行自体は成功 0343名無しQ(・∀・)ノ゜サァン!!2021/07/27(火) 10:56:59.27ID:8/TvBWTD File name too long error
youtube-dl -o "%(id)s.%(ext)s" youtube-dl URL
~$ youtube-dl -o "%(id)s.%(ext)s" https://youtu.be/STSMdPwbpmE?t [youtube] STSMdPwbpmE: Downloading webpage WARNING: Requested formats are incompatible for merge and will be merged into mkv. [download] Destination: STSMdPwbpmE.f247.webm [download] 100% of 70.56MiB in 00:12 [download] Destination: STSMdPwbpmE.f140.m4a [download] 100% of 11.93MiB in 00:02 [ffmpeg] Merging formats into "STSMdPwbpmE.mkv" Deleting original file STSMdPwbpmE.f247.webm (pass -k to keep) Deleting original file STSMdPwbpmE.f140.m4a (pass -k to keep) 0344名無しQ(・∀・)ノ゜サァン!!2021/07/28(水) 05:15:48.01ID:+Ge5JHEE $ sudo sed -i 's/bullseye\/updates/bullseye-security/' /etc/apt/sources.list
これを参考
$ sudo sed -i 's/bullseye\/updates/bullseye-security/' /etc/apt/sources.list
# codename-updates との混同を避けるために、codename/updates から codename-security に変更。 deb http://security.debian.org/debian-security/ bullseye-security main deb-src http://security.debian.org/debian-security/ bullseye-security main ----------------------- $ sudo apt update 成功 今回は以下を置いておく $ sudo sed -i 's/bullseye\/updates/bullseye-security/' /etc/apt/sources.list sed [オプション] 's/置換前文字列/置換後文字列/フラグ' <ファイル名> 0346名無しQ(・∀・)ノ゜サァン!!2021/07/28(水) 10:06:39.77ID:+Ge5JHEE 1,11でいちばん深刻なのはwifi 2,10上でクロームのブックマークをffに移動しておく。 3,スナップショットとったうえで、sed 練習 4,ディスプレイ内スピーカー修理ためす 0347名無しQ(・∀・)ノ゜サァン!!2021/07/28(水) 10:38:06.98ID:+Ge5JHEE>>346 > 2,10上でクロームのブックマークをffに移動しておく。
というか重複してますます数を増やすだけ。頻繁のスイッチと7月フォルダだけ手作業移動。 0348名無しQ(・∀・)ノ゜サァン!!2021/07/28(水) 11:10:38.42ID:+Ge5JHEE 整理移動完了。整理系はほんとしんどい。 0349名無しQ(・∀・)ノ゜サァン!!2021/07/28(水) 19:23:27.58ID:+Ge5JHEE 推測だがたぶんus関係ない。登録が完了してなかったせいだと。再度タカで 0350名無しQ(・∀・)ノ゜サァン!!2021/07/28(水) 19:27:47.82ID:+Ge5JHEE 奥が深い...w Video - Math Myths and the Brain 登録完了後も再生できない
我们建议桌面系统使用者顺便加入 contrib 及 non-free 套件库。 ちなみに、デスクトップユーザーはcontribおよびnon-freeパッケージライブラリを追加することをお勧めします。 0357名無しQ(・∀・)ノ゜サァン!!2021/07/29(木) 16:13:38.35ID:z73qLI8e For desktop systems, it is recommended to correct the original /etc/apt/source.list file (in red color ) and add (in blue color) contrib and non-free repositories:
[デスクトップシステムの場合、元の/etc/apt/source.listファイル(赤色)を修正し、貢献リポジトリと非フリーリポジトリを追加(青色)することをお勧めします。] 0358名無しQ(・∀・)ノ゜サァン!!2021/07/29(木) 20:52:26.58ID:z73qLI8e 初次使用 Debian 11 桌面的 Linux 老手,建议使用下列档案取代官方版的 /etc/apt/source.list: [Debian 11デスクトップを初めて使用するLinuxのベテランの場合は、公式バージョンの/etc/apt/source.listを次のファイルに置き換えることをお勧めします。] 0359名無しQ(・∀・)ノ゜サァン!!2021/07/29(木) 21:00:29.83ID:z73qLI8e [quote]1. Debian 11 官方版的 /etc/apt/source.list 有误 (エラー) ,以致无法进行 sudo apt update,必须修改 (正しい ) 。 Debian11公式バージョンの /etc/apt/source.listのが間違っているため、sudo apt update を実行できず、変更する必要があります。[/quote] 了解 :Grimace [quote]2. 我们建议桌面系统使用者顺便加入 contrib 及 non-free 套件库。 ちなみに、デスクトップユーザーはcontribおよびnon-freeパッケージライブラリを追加することをお勧めします。 [/quote] :Haha [quote]3. For desktop systems, it is recommended to correct the original /etc/apt/source.list file (in red color ) and add (in blue color) contrib and non-free repositories: [デスクトップシステムの場合、元の/etc/apt/source.listファイル(赤色)を修正し、貢献リポジトリと非フリーリポジトリを追加(青色)することをお勧めします。] [/quote]
4: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 34:76:c5:8e:bd:0c brd ff:ff:ff:ff:ff:ff inet 192.168.0.4/24 brd 192.168.0.255 scope global dynamic noprefixroute wlan0 valid_lft 86132sec preferred_lft 86132sec inet6 fe80::3676:8964:6d19:351b/64 scope link noprefixroute valid_lft forever preferred_lft forever 0362名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 00:36:09.74ID:nTtcxI70 NetworkManagerのhandshakeがfailedしたため再接続せずに処理が終了したかと思われます。 また、 No agents were available for this request. "failed (reason 'no-secrets')" で恐らくpasswordを確認出来ない状態になった模様です。
From the output you sent it could be that the ipv6 is failing to connect これを確認してないが
Edit connections > chose your network then click edit > IPV6 tab > set method to "ignore" 0365名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 01:41:26.75ID:nTtcxI70 Jul 30 01:27:26 kyo NetworkManager[3516]: <info> [1627576046.0423] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256' Jul 30 01:27:26 kyo NetworkManager[3516]: <info> [1627576046.0425] Config: added 'psk' value '<hidden>' Jul 30 01:27:26 kyo wpa_supplicant[652]: wlan0: Trying to associate with (SSID='WARPSTAR-' freq=2417 MHz) Jul 30 01:27:26 kyo wpa_supplicant[652]: wlan0: Association request to the driver failed Jul 30 01:27:26 kyo wpa_supplicant[652]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=1 ssid="WARPSTAR-" auth_failures=1 duration=10 reason=CONN_FAILED
wpa_supplicant[652]: wlan0: Association request to the driver failed << 注目 0366名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 01:49:53.81ID:nTtcxI70 jin@kyo:~$ cd /etc/wpa_supplicant/ jin@kyo:/etc/wpa_supplicant$ ls action_wpa.sh functions.sh ifupdown.sh wpa_supplicant.conf jin@kyo:/etc/wpa_supplicant$ cat wpa_supplicant.conf ctrl_interface=/run/wpa_supplicant update_config=1 jin@kyo:/etc/wpa_supplicant$ 0367名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 01:51:34.45ID:nTtcxI70 $ sudo wpa_supplicant -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf Successfully initialized wpa_supplicant ctrl_iface exists and seems to be in use - cannot override it Delete '/run/wpa_supplicant/wlan0' manually if it is not used anymore Failed to initialize control interface '/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
ctrl_interface=/run/wpa_supplicant update_config=1 0370名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 02:09:36.78ID:nTtcxI70>>368 You may have another wpa_supplicant process already running > 別のwpa_supplicantプロセスがすでに実行されているか
Using existing control interface directory. ctrl_iface bind(PF_UNIX) failed: Address already in use ctrl_iface exists and seems to be in use - cannot override it Delete '/run/wpa_supplicant/wlan0' manually if it is not used anymore Failed to initialize control interface '/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
Failed to add interface wlan0 wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=INACTIVE TDLS: Tear down peers nl80211: Data frame filter flags=0x0 wlan0: State: INACTIVE -> DISCONNECTED nl80211: Set wlan0 operstate 0->0 (DORMANT) netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 wlan0: WPA: Clear old PMK and PTK 0385名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 03:08:01.23ID:nTtcxI70 wlan0: Cancelling scan request wlan0: Cancelling authentication timeout Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) nl80211: Data frame filter flags=0x0 Off-channel: Action frame sequence done notification: pending_action_tx= (nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 Remove interface wlan0 from radio phy0 Remove radio phy0 nl80211: deinit ifname=wlan0 disabled_11b_rates=0 nl80211: Remove monitor interface: refcount=0 netlink: Operstate: ifindex=2 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) nl80211: Set mode ifindex 2 iftype 2 (STATION) nl80211: Unsubscribe mgmt frames handle 0x8888dec634dd4859 (mode change) # 0386名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 03:11:12.11ID:nTtcxI70>>373 > 373 名前:名無しQ(・∀・)ノ゜サァン!! [sage]: 2021/07/30(金) 02:24:44.85 ID:nTtcxI70 (25) > # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf -B > Successfully initialized wpa_supplicant > > ctrl_iface exists and seems to be in use - cannot override it > > Delete '/run/wpa_supplicant/wlan0' manually if it is not used anymore > Failed to initialize control interface '/run/wpa_supplicant'. > > You may have another wpa_supplicant process already running or the file was > > left by an unclean termination of wpa_supplicant in which case you will need > to manually remove this file before starting wpa_supplicant again. > > nl80211: deinit ifname=wlan0 disabled_11b_rates=0 > # 0387名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 03:24:31.41ID:nTtcxI70 # cat /etc/wpa_supplicant/wpa_supplicant.conf ctrl_interface=/run/wpa_supplicant update_config=1 network={ ssid="wireless" psk="secret" proto=RSN key_mgmt=WPA-PSK pairwise=TKIP auth_alg=OPEN priority=5 id_str="debian" }
# と適当に変更。 # wpa_supplicant -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf -d wpa_supplicant v2.8-devel random: getrandom() support available Successfully initialized wpa_supplicant Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ctrl_interface='/run/wpa_supplicant' update_config=1 Line 5: Invalid passphrase length 6 (expected: 8..63) 'secret"'. Line 5: failed to parse psk '"secret"'. Line 12: removed CCMP from group cipher list since it was not allowed for pairwise cipher Line 12: failed to parse network block. Failed to read or parse configuration '/etc/wpa_supplicant/wpa_supplicant.conf'. Failed to add interface wlan0 : Cancelling scan request : Cancelling authentication timeout Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 0388名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 03:26:15.62ID:nTtcxI70 jin@kyo:~$ journalctl -p 3 -- Logs begin at Fri 2021-07-30 03:20:13 JST, end at Fri 2021-07-30 03:21:43 JST 7月 30 03:20:16 kyo systemd-udevd[293]: Error running install command for rtlwi lines 1-2/2 (END)
念の為これをやらず、バックアップとして、usb へ 0399名無しQ(・∀・)ノ゜サァン!!2021/07/30(金) 22:24:49.62ID:nTtcxI70 Jul 30 01:27:26 kyo NetworkManager[3516]: <info> [1627576046.0423] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256' Jul 30 01:27:26 kyo NetworkManager[3516]: <info> [1627576046.0425] Config: added 'psk' value '<hidden>' Jul 30 01:27:26 kyo wpa_supplicant[652]: wlan0: Trying to associate with (SSID='WARPSTAR-' freq=2417 MHz) Jul 30 01:27:26 kyo wpa_supplicant[652]: wlan0: Association request to the driver failed Jul 30 01:27:26 kyo wpa_supplicant[652]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=1 ssid="WARPSTAR-" auth_failures=1 duration=10 reason=CONN_FAILED
wpa_supplicant[652]: wlan0: Association request to the driver failed << 注目 0400名無しQ(・∀・)ノ゜サァン!!2021/07/31(土) 10:42:36.83ID:COVOcNVH 古い history.3.txt の重複排除
systemd-udevd[293]: Error running install command for rtlwi
kyo [1463]: /usr/lib/systemd/system-sleep/xkeyboard failed with
wpa_supplicant[653]: dbus: wpa_dbus_property_changed: no property SessionLength in object [1463]: /usr/lib/systemd/system-sleep/xkeyboard failed with exit status 1.
------------------------------------------------------ kernel: usb 5-1: device 関連は消えた。ただし、
Create this empty file: [ あなたはまだpulseaudioをマスクする必要があるかもしれません。]
# touch /etc/pipewire/media-session.d/with-pulseaudio ---------------------------- // Check for new service files with: [ //次のコマンドで新しいサービスファイルを確認します:] systemctl --user daemon-reload
// Disable and stop the PulseAudio service with: [ // PulseAudioサービスを無効にして停止します。] systemctl --user --now disable pulseaudio.service pulseaudio.socket
// Enable and start the new pipewire-pulse service with: [ //次のコマンドで新しいpipewire-pulseサービスを有効にして開始します。] systemctl --user --now enable pipewire pipewire-pulse
n@RY:~$ history -c n@RY:~$ history 1 history n@RY:~$
2,n@RY:~$ history -r unduped_history.txt で読み込む、整理済みを 588個
3,n@RY:~$ history -w 「.bash_history」に直接吐き出す
17.2kb いけたっぽい 0419名無しQ(・∀・)ノ゜サァン!!2021/07/31(土) 21:07:22.34ID:COVOcNVH Uninstallation Related Problems
If PipeWire was installed by default on your system, There are no way to completely remove it, because other packages may have dependency on PipeWire, You can only downgrade PipeWire to the system default version in that case. [ PipeWireがデフォルトでシステムにインストールされている場合、他のパッケージがPipeWireに依存している可能性があるため、完全に削除する方法はありません。その場合、PipeWireをシステムのデフォルトバージョンにダウングレードすることしかできません。] If you are forcefully want to remove you may see involvements of Lots of packages ready to be uninstalled. [ 強制的に削除したい場合は、アンインストールする準備ができている多くのパッケージの関与が表示される場合があります。]
To downgrade PipeWire along with all packages that were installed/upgraded with PipeWire, use ppa-purge program, To downgrade. [ PipeWireでインストール/アップグレードされたすべてのパッケージとともにPipeWireをダウングレードするには、ppa-purgeプログラムを使用してダウングレードします。] There are lots of tutorial available on ppa-purge on the internet, Please search. [ インターネット上のppa-purgeで利用できるチュートリアルがたくさんあります。検索してください。] ppa-purge program is already available on ubuntu official repo. [ ppa-purgeプログラムは、ubuntuの公式リポジトリですでに利用可能です。] Distros where ppa-purge program not available officially, They can install from this PPA also. [ ppa-purgeプログラムが公式に利用できないディストリビューション、このPPAからもインストールできます。] The installation process follow the same as pipewire, Please see installation Section. [ インストールプロセスはパイプワイヤーと同じです。インストールセクションを参照してください。] 0420名無しQ(・∀・)ノ゜サァン!!2021/07/31(土) 21:13:20.22ID:COVOcNVH $ sudo apt purge --auto-remove pipewire パッケージリストを読み込んでいます... 完了 依存関係ツリーを作成しています... 完了 状態情報を読み取っています... 完了 以下のパッケージは「削除」されます: libpipewire-0.3-modules* pipewire* pipewire-bin* アップグレード: 0 個、新規インストール: 0 個、削除: 3 個、保留: 307 個。 この操作後に 3,418 kB のディスク容量が解放されます。 続行しますか? [Y/n] y (データベースを読み込んでいます ... 現在 269143 個のファイルとディレクトリがインストールされています。) pipewire:amd64 (0.3.19-4) を削除しています ... pipewire-bin (0.3.19-4) を削除しています ... libpipewire-0.3-modules:amd64 (0.3.19-4) を削除しています ... man-db (2.9.4-2) のトリガを処理しています ... (データベースを読み込んでいます ... 現在 269006 個のファイルとディレクトリがインストールされています。) pipewire-bin (0.3.19-4) の設定ファイルを削除しています ... pipewire:amd64 (0.3.19-4) の設定ファイルを削除しています ... n@RY:~$
特にやばいものが抜けた感じはしないが、apt 動作時にスナップショット作成が構成されてない。次調べる 0421名無しQ(・∀・)ノ゜サァン!!2021/07/31(土) 21:19:05.72ID:COVOcNVH この変更は効果なし。音も出る。 戻す。 0422名無しQ(・∀・)ノ゜サァン!!2021/07/31(土) 22:02:38.86ID:COVOcNVH # make mkdir -p .deps Package openssl was not found in the pkg-config search path. Perhaps you should add the directory containing `openssl.pc' to the PKG_CONFIG_PATH environment variable No package 'openssl' found Package openssl was not found in the pkg-config search path. Perhaps you should add the directory containing `openssl.pc' to the PKG_CONFIG_PATH environment variable No package 'openssl' found cc -O3 -Wall -Wextra -std=gnu99 -MMD -MF .deps/hcxdumptool.d -o hcxdumptool hcxdumptool.c -DVERSION_TAG=\"6.2.0-21-gf71db1b\" -DVERSION_YEAR=\"2021\" hcxdumptool.c:41:10: fatal error: openssl/conf.h: そのようなファイルやディレクトリはありません #include <openssl/conf.h> ^~~~~~~~~~~~~~~~ compilation terminated. make: *** [Makefile:73: hcxdumptool] エラー 1 # ls Android.mk README.md hcxdumptool.c jni AndroidManifest.xml changelog hcxpioff.c license.txt Makefile docs include usefulscripts 0423名無しQ(・∀・)ノ゜サァン!!2021/07/31(土) 22:02:51.14ID:COVOcNVH # make mkdir -p .deps Package openssl was not found in the pkg-config search path. Perhaps you should add the directory containing `openssl.pc' to the PKG_CONFIG_PATH environment variable No package 'openssl' found Package openssl was not found in the pkg-config search path. Perhaps you should add the directory containing `openssl.pc' to the PKG_CONFIG_PATH environment variable No package 'openssl' found cc -O3 -Wall -Wextra -std=gnu99 -MMD -MF .deps/hcxdumptool.d -o hcxdumptool hcxdumptool.c -DVERSION_TAG=\"6.2.0-21-gf71db1b\" -DVERSION_YEAR=\"2021\" hcxdumptool.c:41:10: fatal error: openssl/conf.h: そのようなファイルやディレクトリはありません #include <openssl/conf.h> ^~~~~~~~~~~~~~~~ compilation terminated. make: *** [Makefile:73: hcxdumptool] エラー 1 0424名無しQ(・∀・)ノ゜サァン!!2021/07/31(土) 22:58:07.58ID:COVOcNVHhttps://www.debian.org/doc/manuals/debian-handbook/sect.network-config
This is a repackaging of Realtek's own 8192CU USB WiFi driver for Ubuntu 13.10 and later. [ これは、Ubuntu13.10以降用のRealtek独自の8192CUUSBWiFiドライバーの再パッケージ化です。]
>LANG=zh コマンド でいけんじゃね? だめ。別ページ https://eng-entrance.com/linux-localization-lang デフォルトでインストールされるロケールが絞られています。たとえばUbuntuの場合、以下のコマンドで「言語パック」を追加 sudo apt install language-pack-en* language-pack-ja* language-pack-fr* language-pack-de* language-pack-zh-hans* language-pack-zh-hant* language-pack-ko* 0469名無しQ(・∀・)ノ゜サァン!!2021/08/07(土) 11:21:56.89ID:EFAwQTbD パッケージ: language-pack-zh-hans (1:18.04+20180712) translation updates for language Simplified Chinese
$ sudo apt install language-pack-zh-hans* Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package language-pack-zh-hans* E: Couldn't find any package by glob 'language-pack-zh-hans*' E: Couldn't find any package by regex 'language-pack-zh-hans*'
$ sudo apt update Get:1 http://security.debian.org/debian-security buster/updates InRelease [65.4 kB] Hit:2 http://deb.debian.org/debian buster InRelease Get:3 http://deb.debian.org/debian buster-updates InRelease [51.9 kB] Get:4 http://deb.debian.org/debian buster-backports InRelease [46.7 kB] Hit:5 https://dl.winehq.org/wine-builds/debian buster InRelease Get:6 http://repo.radeon.com/rocm/apt/debian xenial InRelease [1817 B] Hit:7 http://dl.google.com/linux/chrome/deb stable InRelease Err:6 http://repo.radeon.com/rocm/apt/debian xenial InRelease The following signatures were invalid: EXPKEYSIG 9386B48A1A693C5C James Adrian Edwards (ROCm Release Manager) <JamesAdrian.Edwards@amd.com> Fetched 164 kB in 2s (74.9 kB/s) Reading package lists... Done Building dependency tree Reading state information... Done 3 packages can be upgraded. Run 'apt list --upgradable' to see them. W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://repo.radeon.com/rocm/apt/debian xenial InRelease: The following signatures were invalid: EXPKEYSIG 9386B48A1A693C5C James Adrian Edwards (ROCm Release Manager) <JamesAdrian.Edwards@amd.com> W: Failed to fetch http://repo.radeon.com/rocm/apt/debian/dists/xenial/InRelease The following signatures were invalid: EXPKEYSIG 9386B48A1A693C5C James Adrian Edwards (ROCm Release Manager) <JamesAdrian.Edwards@amd.com> W: Some index files failed to download. They have been ignored, or old ones used instead.
$ を何とかする。 0471名無しQ(・∀・)ノ゜サァン!!2021/08/07(土) 13:40:01.48ID:EFAwQTbD $ lsusb -s 2:5 -v Bus 002 Device 005: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0x8178 RTL8192CU 802.11n WLAN Adapter bcdDevice 2.00 iManufacturer 1 I-O DATA DEVICE, INC. iProduct 2 WN-G300UA iSerial 3 00e04c000001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x002e bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: 0472名無しQ(・∀・)ノ゜サァン!!2021/08/07(土) 13:40:04.72ID:EFAwQTbD bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 (Bus Powered) 0473名無しQ(・∀・)ノ゜サァン!!2021/08/08(日) 11:27:24.32ID:s0w/n8FA /0/100/14 bus FCH SMBus Controller /0/100/14.2 multimedia FCH Azalia Controller /0/100/14.3 bridge FCH LPC Bridge /0/100/14.4 bridge FCH PCI Bridge /0/100/14.5 bus FCH USB OHCI Controller /0/100/14.5/1 usb9 bus OHCI PCI host controller /0/101 bridge Family 12h/14h Processor Functio /0/102 bridge Family 12h/14h Processor Functio /0/103 bridge Family 12h/14h Processor Functio /0/104 bridge Family 12h/14h Processor Functio /0/105 bridge Family 12h/14h Processor Functio /0/106 bridge Family 12h/14h Processor Functio /0/107 bridge Family 12h/14h Processor Functio /0/108 bridge Family 12h/14h Processor Functio /0/1 system PnP device PNP0c01 /0/2 system PnP device PNP0c02 /0/3 system PnP device PNP0c02 /0/4 system PnP device PNP0b00 /0/5 system PnP device PNP0c02 /0/6 system PnP device PNP0c02 /0/7 input PnP device PNP0303 /1 wlx3476c58ebd0c network Wireless interface
コマンドラインからコマンドを実行する際の手順は次のとおりです: Open the Run Application dialog in any of the following ways:
From a panel You can add the Run Application button to any panel. See オブジェクトをパネルに追加する. Click on the Run Application panel button to open the Run Application dialog. Using shortcut keys
Press Alt+F2. You can change the shortcut keys that display the Run Application dialog in the キーボード・ショートカットを設定する tool. 「アプリケーションの実行」ダイアログが表示されます。 0478名無しQ(・∀・)ノ゜サァン!!2021/08/08(日) 15:01:47.97ID:s0w/n8FA /usr/bin/google-chrome-stable をスタートメニューまたはパネルに
空白になっている部分に実行したいコマンドを入力するか、または既存のアプリケーション一覧からコマンドを選択してください。 If you enter only the location of a file, an appropriate application will launch to open it.
これを実行してる ゆえに W: ターゲット Packages (main/binary-amd64/Packages) は /etc/apt/sources.list.d/google.list:1 と /etc/apt/sources.list.d/google.list:2 で複数回設定されています 0488名無しQ(・∀・)ノ゜サァン!!2021/08/09(月) 23:11:31.22ID:nhDBRjNz chrome使用可能、ここまで。いっぺんにやらない。先生 0489名無しQ(・∀・)ノ゜サァン!!2021/08/11(水) 13:46:02.95ID:gnTvTCYs ディスプレイスピーカー修理 0490名無しQ(・∀・)ノ゜サァン!!2021/08/11(水) 15:25:58.75ID:gnTvTCYs If you find that your wireless network device can scan, but will not complete connecting, try turning off MAC address randomization. [ワイヤレスネットワークデバイスがスキャンできるが接続が完了しない場合は、MACアドレスのランダム化をオフにしてみてください。]
Aug 13 15:11:49 RY rtkit-daemon[860]: Supervising 7 threads of 4 processes of 1 users. Aug 13 15:11:49 RY rtkit-daemon[860]: Supervising 7 threads of 4 processes of 1 users. Aug 13 15:11:51 RY rtkit-daemon[860]: Supervising 7 threads of 4 processes of 1 users. Aug 13 15:11:51 RY rtkit-daemon[860]: Supervising 7 threads of 4 processes of 1 users. Aug 13 15:11:56 RY rtkit-daemon[860]: Supervising 7 threads of 4 processes of 1 users. Aug 13 15:11:56 RY rtkit-daemon[860]: Supervising 7 threads of 4 processes of 1 users. root@RY:~# 0499名無しQ(・∀・)ノ゜サァン!!2021/08/13(金) 15:20:36.31ID:W9QDEb5L バスターで 2020/05/11 18:05メールを再検証せよ 0500名無しQ(・∀・)ノ゜サァン!!2021/08/13(金) 16:10:16.59ID:W9QDEb5L # cat /var/log/messages
Aug 13 16:00:26 kyo brisk-menu[1131]: gdk_window_get_origin: assertion 'GDK_IS_WINDOW (window)' failed Aug 13 16:00:26 kyo brisk-menu[1131]: gdk_window_get_origin: assertion 'GDK_IS_WINDOW (window)' failed Aug 13 16:00:26 kyo brisk-menu[1131]: Negative content width -10 (allocation 1, extents 5x6) while allocating gadget (node button, owner GtkToggleButton) Aug 13 16:00:26 kyo brisk-menu[1131]: org.mate.ScreenSaver not running: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.mate.ScreenSaver was not provided by any .service files
DEAUTH_LEAVING auth_failures=1 は出ていないかんじ 0501名無しQ(・∀・)ノ゜サァン!!2021/08/13(金) 16:20:46.41ID:W9QDEb5L 8月 13 16:18:40 kyo systemd-udevd[294]: Error running install command for rtlwifi 8月 13 16:19:34 kyo wpa_supplicant[651]: dbus: wpa_dbus_property_changed: no property SessionLength in object 8月 13 16:19:44 kyo [1392]: /usr/lib/systemd/system-sleep/xkeyboard failed with exit status 1. 8月 13 16:19:44 kyo wpa_supplicant[651]: dbus: wpa_dbus_property_changed: no property SessionLength in object ~ 0502名無しQ(・∀・)ノ゜サァン!!2021/08/13(金) 16:59:28.84ID:W9QDEb5L Error running install command for rtlwifi dbus: wpa_dbus_property_changed: no property SessionLength in object /usr/lib/systemd/system-sleep/xkeyboard failed with exit status 1. dbus: wpa_dbus_property_changed: no property SessionLength in object
nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_i Failed to set IPv4 unicast in multicast filter 0503名無しQ(・∀・)ノ゜サァン!!2021/08/13(金) 17:14:24.98ID:W9QDEb5L $ sudo wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0Successfully initialized wpa_supplicant
ctrl_iface exists and seems to be in use - cannot override it
Delete '/run/wpa_supplicant/wlan0' manually if it is not used anymore
Failed to initialize control interface '/run/wpa_supplicant'.
You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
nl80211: deinit ifname=wlan0 disabled_11b_rates=0 0504名無しQ(・∀・)ノ゜サァン!!2021/08/13(金) 17:28:53.74ID:W9QDEb5L jin@kyo:/etc/wpa_supplicant$ cat wpa_supplicant.conf ctrl_interface=/run/wpa_supplicant update_config=1 jin@kyo:/etc/wpa_supplicant$ 0505名無しQ(・∀・)ノ゜サァン!!2021/08/13(金) 17:32:33.50ID:W9QDEb5L # cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface auto lo iface lo inet loopback # autoに有効にするインターフェイスを書き、 ifaceでipの取得方法などを設定するらしい。 0506名無しQ(・∀・)ノ゜サァン!!2021/08/14(土) 18:10:24.28ID:GbA09wR4 >アンテナ線を通じては放送局にはデーターが送られますがテレビメーカーに送ることはないと思っている。 「家のアンテナ」は「送信用」には出来ていませんm(_ _)m <「テレビ」自身にも「送信機」は内蔵されていませんし...
ファームウェア更新のことだろう。点滅とは。外国版ファームウェアをフラッシュして、 現在の症状つまり「チャンネル登録の設定が勝手に消える」が直ったという根拠がまったくない。 その上でリスクを犯せば以上の台湾人さんの報告をムダにすることになる。 0511名無しQ(・∀・)ノ゜サァン!!2021/08/15(日) 10:19:58.92ID:eDrBSR81 root@RY:~# systemctl status pipewire.service Unit pipewire.service could not be found. root@RY:~# systemctl status pipewire.socket Unit pipewire.socket could not be found. root@RY:~# 0512名無しQ(・∀・)ノ゜サァン!!2021/08/15(日) 10:24:22.17ID:eDrBSR81 this is my xinitrc
if which dbus-launch >/dev/null && test -z "$DBUS_SESSION_BUS_ADDRESS"; then eval `dbus-launch --sh-syntax --exit-with-session` fi sxhkd & exec bspwm /usr/bin/pipewire 0513名無しQ(・∀・)ノ゜サァン!!2021/08/15(日) 10:33:37.18ID:eDrBSR81 xinitrc
# Failed to receive portal pid: org.freedesktop.DBus.Error.NameHasNoOwner: Could not get PID of name 'org.freedesktop.portal.Desktop': no such name
if which dbus-launch >/dev/null && test -z "$DBUS_SESSION_BUS_ADDRESS"; then eval `dbus-launch --sh-syntax --exit-with-session` fi sxhkd & exec bspwm /usr/bin/pipewire ---------------------------------- 効果なし。タイムシフト。参考源が英語で「それで解決したのか、してないのか?」すら 読み取れてない状態で無意味 0515名無しQ(・∀・)ノ゜サァン!!2021/08/16(月) 01:16:41.49ID:Ihigoi9uhttps://vitux.com/install-tp-link-usb-wifi-adapter-to-debian-10/
プログラムのソースコードなどの変更履歴を記録・追跡するための分散型バージョン管理システムである。Linuxカーネルのソースコード管理に用いるためにリーナス・トーバルズによって開発され、それ以降ほかの多くのプロジェクトで採用されている。Linuxカーネルのような巨大プロジェクトにも対応できるように、動作速度に重点が置かれている。現在のメンテナは濱野純 (英語: Junio C Hamano) で、2005年7月から担当している。
This Add-On was released after a similar Add-On, but this Add-On only opens links to Chrome, which the older Add-On is also able to do, and the older Add-On has more features. It has never been updated since it's release in Jun 2017. It seems to be an abandon AddOn.
I do NOT recommend "Open in Chrome" Add-On.
Instead, I recommend Add-On "Google Chrome Browser". [Google Chrome Browser] was updated 29 Dec 2019. 0531名無しQ(・∀・)ノ゜サァン!!2021/08/17(火) 12:25:05.15ID:+xrRJlBr ▲「Firefoxへ追加」ボタンをクリックしてインストールしてください。ただしこの拡張は拡張本体だけを単にインストールしただけでは動作せず、 小さなネイティブクライアントを追加でインストールする必要があります。
-> Creating a directory at /home/n/.config/vivaldi/NativeMessagingHosts -> Vivaldi Browser is supported -> Creating a directory at /home/n/.config/BraveSoftware/Brave-Browser/NativeMessagingHosts -> Brave Browser is supported -> Creating a directory at /home/n/.config/microsoftedge/NativeMessagingHosts -> Microsoft Edge Browser is supported -> Creating a directory at /home/n/.mozilla/native-messaging-hosts -> Firefox Browser is supported -> Creating a directory at /home/n/.waterfox/native-messaging-hosts -> Waterfox Browser is supported -> Creating a directory at /home/n/.tor-browser/app/Browser/TorBrowser/Data/Browser/.mozilla/native-messaging-hosts -> Tor Browser is supported -> Creating a directory at /home/n/.thunderbird/native-messaging-hosts -> Thunderbird Email Client is supported -> Creating a directory at /home/n/.config/com.add0n.node => Native Host is installed in /home/n/.config/com.add0n.node
>>> host is ready <<<
n@RY:~$ 0532名無しQ(・∀・)ノ゜サァン!!2021/08/17(火) 12:43:05.83ID:+xrRJlBr "Open in Google Chrome "拡張機能は、現在のタブやリンクをGoogle Chromeブラウザで開くブラウザ拡張機能です。 この拡張機能を使えば、手動でリンクをコピー&ペーストすることなく、Google Chromeにリンクを送信することができます。 簡単にアクセスできるようにキーボードショートカットを定義することも可能です
>>見当たらない。右クリックのコンテキストメニューも 0534名無しQ(・∀・)ノ゜サァン!!2021/08/17(火) 12:58:54.18ID:+xrRJlBr そういえば Open in Chromium Browser の初期設定画面に戻り、 「Check Connection」をクリックします。
ここでおかしかった もう一度だけ試してだめなら 戻す
右下に緑色の表示が出れば正常に設定が出来ています。 0535名無しQ(・∀・)ノ゜サァン!!2021/08/17(火) 13:01:15.22ID:+xrRJlBr 放棄。全部戻す 0536名無しQ(・∀・)ノ゜サァン!!2021/08/17(火) 15:06:52.13ID:+xrRJlBr n@RY:~$ '/home/n/ダウンロード/ブラウザ間リンク/uninstall.sh' -> Removing manifest file for Google Chrome -> Removing manifest file for Chromium -> Removing manifest file for Vivaldi -> Removing manifest file for Brave -> Removing manifest file for Microsoft Edge -> Removing manifest file for Mozilla Firefox -> Removing manifest file for Waterfox -> Removing manifest file for Tor -> Removing manifest file for Thunderbird -> Removing executables >>> Native Client is removed <<<. n@RY:~$ 0537名無しQ(・∀・)ノ゜サァン!!2021/08/17(火) 15:13:14.06ID:+xrRJlBr Requires access to your data for all websites, exchange messages with programs other than Firefox, Download files and read and modify the browser's download history. [すべてのWebサイトのデータへのアクセス、Firefox以外のプログラムとのメッセージの交換、ファイルのダウンロード、ブラウザーのダウンロード履歴の読み取りと変更が必要です。] None of that is needed. [そのどれも必要ありません。] This is just an addon to get information, would recommend not to install. [これは情報を取得するための単なるアドオンであり、インストールしないことをお勧めします。]
Scan trigger failed on wlxd03745e0ad48: No such device
iw では
command failed: No such device (-19) ----------------------------------------------
どちらの場合も同じエラーが返されることに注意してください。
問題はwavemonにはありません。あなたは調べることができます
別のデバイス/ドライバーを使用して、 r8188euメンテナにnl80211機能を追加するように依頼します。 0540名無しQ(・∀・)ノ゜サァン!!2021/08/17(火) 15:56:56.17ID:+xrRJlBr root@RY:~# ip addr show wlxd03745e0ad48
2: wlxd03745e0ad48: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether d0:37:45:e0:ad:48 brd ff:ff:ff:ff:ff:ff inet 192.168.0.7/24 brd 192.168.0.255 scope global dynamic noprefixroute wlxd03745e0ad48 valid_lft 85682sec preferred_lft 85682sec inet6 fe80::1a0e:5672:e5d9:76a5/64 scope link noprefixroute valid_lft forever preferred_lft forever root@RY:~#
Answer from Larry Finger, maintainer of derived work from Realtek:
Only very old hostapd is supported by the staging driver, and not very well.
I just wonder, why that cleanup development is happening out-of-tree (having it mainline would be easier for users). UPDATE: out-of-tree code is that complex that it'd take years to get it in a shape. That unfortunately leads to out-of-tree driver.
------------- lspci はusbデバイスだから必要ないのではないかと考えたが 0558名無しQ(・∀・)ノ゜サァン!!2021/08/18(水) 22:51:29.59ID:GP3ykxcK $ sudo rfkill list
$
$ sudo ip link set wlan0 up
$ sudo ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000 link/ether d0:37:45:e0:ad:48 brd ff:ff:ff:ff:ff:ff
$ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether d0:37:45:e0:ad:48 brd ff:ff:ff:ff:ff:ff inet 192.168.0.7/24 brd 192.168.0.255 scope global dynamic noprefixroute wlan0 valid_lft 86391sec preferred_lft 86391sec inet6 fe80::ae00:1329:e4a2:acb0/64 scope link noprefixroute valid_lft forever preferred_lft forever
$ tar zxfv xxxxxxxx.tar.gz $ cd xxxxxxxx $ ./configure $ make # make install 0564名無しQ(・∀・)ノ゜サァン!!2021/08/19(木) 21:55:46.87ID:sxCn5IAT 「configure」は,これからインストールを行うOSのCPUやバージョンを調べたり,必要な関連ツールを調査する。 そして,これらの状況を記述したMakefileファイルを作成する。
公式ドキュメントの大半が翻訳されてないからだ。でビアンの。機械翻訳のおかしな日 本語が耐えられんからだ。 しかし自分はデビアンヲ選択し、しかも英語を読んでいくことを彼に誓った。 =========================== Introduction A WiFi device operates on an electronic chip called a "chipset". [WiFiデバイス は、「チップセット」と呼ばれる電子チップ上で動作します。] We can find the same chipset in several different devices. [同じチップセットをいくつかの異なるデバ イスで見つけることができます。] Consequently, the driver/module for one chipset will work for all wireless devices using that chipset. [したがって、1 つのチップセットのドライバ/モジュールは、そのチップセットを使用するすべてのワ イヤレスデバイスで機能します。]
Free software based systems such as Debian depend on the cooperation between manufacturers and developers to produce and maintain quality drivers and firmware. [Debianなどの自由ソフトウェアベースのシステムは、高品質のドライバと ファームウェアを作成および維持するために、製造元と開発者の間の協力に依存してい ます。] Drivers and firmware are what determine if, and how well, your hardware works. [ドライバーとファームウェアは、ハードウェアが機能するかどうか、 およびどの程度機能するかを決定するものです。]
Debian's Social Contract mandates the freeing of the distribution. [Debianの社会契約は、ディストリビューションの解放を義務付けています。] 0608名無しQ(・∀・)ノ゜サァン!!2021/08/27(金) 10:59:15.13ID:KDdiGRSx In practice this means manufacturers are required to cooperate by releasing specifications and free drivers that can be worked on by the community. [実際には、これは、メーカーがコミュニティで作業できる仕様と無料のドライバー をリリースすることによって協力する必要があることを意味します。]
Newer versions of Debian (6+) do not include non-free drivers or firmware. [Debianの新しいバージョン(6以降)には、フリーでないドライバやファームウェアは 含まれていません。]
Non-free drivers and firmware are produced by entities refusing or unable to cooperate with the free software community. [非フリーのドライバーとファームウェアは、フリーソフトウェアコミュニティとの協 力を拒否またはできないエンティティによって作成されます。]
With non-free drivers and firmware support is often unavailable or severely constrained. [フリーでないドライバーとファームウェアのサポートでは、多くの場合、 利用できないか、厳しく制限されています。]
For instance features are often left out, bugs go unfixed, and what support does exist from the manufacture may be fleeting. [たとえば、機能が省略されたり、バグが修正されなかったり、製造元からのサポー トが一瞬である場合があります。]
By encouraging good social practices the community is able to support end- users. [優れた社会的慣行を奨励することにより、コミュニティはエンドユーザーをサ ポートすることができます。] Complex installation procedures are no longer required and support may continue long after a product has been discontinued. [複雑なインストール手順は不要になり、製品が製造中止になった後もサポートが継続 される場合があります。] 0609名無しQ(・∀・)ノ゜サァン!!2021/08/27(金) 11:05:02.77ID:KDdiGRSx Availability of compatible WiFi chipsets [互換性のあるWiFiチップセットの可用 性] Currently there are only a few modern wifi chipsets readily available that work with free software systems. [現在、無料のソフトウェアシステムで動作する最新のwifiチップセットはごくわずか です。]
For USB wifi devices this list includes the Realtek RTL8187B chipset (802.11G) and the Atheros AR9170 chipset (802.11N). [USB Wi-Fiデバイスの場合、このリストにはRealtek RTL8187Bチップセット (802.11G)とAtheros AR9170チップセット(802.11N)が含まれます。]
Wifi has always been a problem for free software users. [Wifiは常に自由ソフトウェアユーザーにとって問題でした。]
Solving this problem will require more demand than currently exists. [この問 題を解決するには、現在よりも多くの需要が必要になります。]
Next time you purchase a piece of hardware ask yourself if it is free software compatible. [次回ハードウェアを購入するときは、それが自由ソフトウェア と互換性があるかどうかを自問してください。] 0610名無しQ(・∀・)ノ゜サァン!!2021/08/27(金) 11:13:47.40ID:KDdiGRSx The following devices have been tested and are confirmed to work with FOSS software only with the latest Debian: [以下のデバイスはテスト済みであり、最新のDebianでのみFOSSソフトウェアで動作す ることが確認されています。]
TP-Link TL WN821N Confirmed [確認済み]
Drawbacks/Comments [欠点/コメント]
TP-Link TL WN821N
- The original code of the driver is copyrighted and later contributors don't know by whom. [-ドライバーの元のコードは著作権で保護されており、後の寄稿者は誰が誰であるかを 知りません。] The driver download does not contain license information. [ドライバのダウン ロードには、ライセンス情報は含まれていません。]
- Only works when disabling random MAC addresses. [-ランダムなMACアドレスを無 効にする場合にのみ機能します。] 0611名無しQ(・∀・)ノ゜サァン!!2021/08/27(金) 11:25:51.86ID:KDdiGRSx ガイド(ただし、TP-Link TL WN821N)
1. Update: sudo apt-get update && apt-get upgrade && && apt-get dist-upgrade and reboot if you updated the kernel 再起動
2. Connect the device. lsusb should show 2357:0107
5. Reboot and check that the kernel module is loaded by running: lsmod
6. Use your network-interface to connect to the WLAN. You could use the pre-installed NetworkManager for that. [そのために、プリインストールされているNetworkManagerを使用できます。] ------------------------------------------------------ (7.) Edit NetworkManager.conf as root: sudo kate /etc/NetworkManager/NetworkManager.conf Append the following: [device] wifi.scan-rand-mac-address=no Save and run: /etc/init.d/network-manager restart
挿すだけで動くUSBのWi-Fi子機 私が実際に購入して、ドライバとか難しい事は何もせず、USB端子に挿しただけで使えた無線LANの子機(TL-WN725N・TP-Link社製) 0612名無しQ(・∀・)ノ゜サァン!!2021/08/27(金) 12:40:28.75ID:KDdiGRSx>>611 > (7.) Edit NetworkManager.conf as root: sudo kate /etc/NetworkManager/NetworkManager.conf > Append the following: > [device] > wifi.scan-rand-mac-address=no > Save and run: /etc/init.d/network-manager restart
新 ✓ 改行 角括弧内に表示 ✓ 単語で揃える 元の言語の前に挿入 元の言語を非表示にする 0614名無しQ(・∀・)ノ゜サァン!!2021/08/27(金) 12:52:36.64ID:KDdiGRSx <<改行はイメージ通りにならなかった ...と思ったが原文の次に翻訳が改行されてる! Devices that might work
According to some users/reviewers these devices might possibly work with the latest Debian. 一部のユーザー/レビューアによると、これらのデバイスは最新のDebianで動作する可能性があります。 They need to be confirmed and need specific guides. それらは確認される必要があり、特定のガイドが必要です。
Furthermore, they might only work with proprietary firmware (FOSS-column). さらに、それらは独自のファームウェア(FOSS-column)でのみ機能する可能性があります。
"apt-get install firmware-realtek"
$ sudo apt install firmware-realtek パッケージリストを読み込んでいます... 完了 依存関係ツリーを作成しています 状態情報を読み取っています... 完了 firmware-realtek はすでに最新バージョン (20190114-2) です。 アップグレード: 0 個、新規インストール: 0 個、削除: 0 個、保留: 3 個。 jin@kyo:~$ 0615名無しQ(・∀・)ノ゜サァン!!2021/08/27(金) 12:59:24.96ID:KDdiGRSx Prerequisites 前提条件 These parameters are controlled using the iwconfig program. これらのパラメータは、iwconfigプログラムを使用して制御されます。
For basic command line usage:
iw tool for manipulating Linux Wireless stack via cfg80211/nl80211. Cfg80211 / nl80211を介してLinuxワイヤレススタックを操作するためのiwツール。
wireless-tools, tools for manipulating Linux Wireless Extensions (installed by default on Desktop & Laptop installations) ワイヤレスツール、Linuxワイヤレス拡張機能を操作するためのツール(デスクトップおよびラップトップのインストールにデフォルトでインストールされます)
Use lsusb to see information about which USB WiFi adapter is connected
Install Driver Before you buy, verify your intended device is supported by an available Linux driver. 購入する前に、目的のデバイスが利用可能なLinuxドライバーでサポートされていることを確認してください。 >>確認した、必死
A good indication of support is Tux being displayed on the product's packaging. サポートの良い兆候は、製品のパッケージにTuxが表示されていることです。
>>それはない、ウインとマックのみ 0617名無しQ(・∀・)ノ゜サァン!!2021/08/27(金) 13:24:14.30ID:KDdiGRSx Better, perhaps, is using a web search engine to find reports
おそらく、Web検索エンジンを使用して、...を見つけることをお勧めします。
from others using it with Debian stable attesting to its performance and usability.
ID USB 0bda:8179 名前 RTL8188EUS802.11nワイヤレスネットワークアダプター
Debian 11 Jul 29, 2021 works確認 0625名無しQ(・∀・)ノ゜サァン!!2021/08/28(土) 14:32:57.91ID:nF3JgUEi My Wifi card doesn't work/is not detected:>> CD image with included non-free firmwares,
lo no wireless extensions. 0628名無しQ(・∀・)ノ゜サァン!!2021/08/28(土) 21:08:49.83ID:nF3JgUEi jin@kyo:~$ pluma admin:///etc/NetworkManager/conf.d/default-wifi-powersave-on.conf
jin@kyo:~$ cd /etc/NetworkManager/conf.d jin@kyo:/etc/NetworkManager/conf.d$ ls jin@kyo:/etc/NetworkManager/conf.d$ ls -a . .. jin@kyo:/etc/NetworkManager/conf.d$
戻る。デビアンwiki 0629名無しQ(・∀・)ノ゜サァン!!2021/08/29(日) 14:36:56.94ID:Eq/Hf/SLhttps://wiki.debian.org/WiFi/HowToUse 要旨 Once your wireless device has an interface available (verifiable by running "ip link show"), it is required to be configured to access a network.
$ ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000 link/ether brd ff:ff:ff:ff:ff:ff
$ Wireless network interface configuration requires a backend, generally wpa_supplicant (often in conjunction with ifupdown and other utilities) or IWD.
Examples of these would generally be NetworkManager, ConnMan, systemd-networkd, and Wicd. これらの例は、通常、NetworkManager、ConnMan、systemd-networkd、およびWicdです。 0630名無しQ(・∀・)ノ゜サァン!!2021/08/29(日) 14:39:27.10ID:Eq/Hf/SL Automatic
NetworkManager
For the average desktop user, the easiest way to configure your network is to install the GUI frontend for NetworkManager that corresponds to your desktop.
NetworkManager itself is a frontend for different network backends (wpa_supplicant by default) that abstracts away the configuration and simplifies it.
Your wireless interface should not be referenced within Debian's /etc/network/interfaces file. ワイヤレスインターフェースは、Debianの/ etc / network / interfacesファイル内で参照されるべきではありません。 0631名無しQ(・∀・)ノ゜サァン!!2021/08/29(日) 14:46:03.72ID:Eq/Hf/SL NetworkManager on a generic desktop/headless session
一般的なデスクトップ/ヘッドレスセッションのNetworkManager
If there is no GUI frontend available, the "nmcli" and "nmtui" commands are available as CLI and TUI frontends respectively for NetworkManager.
--------------------------------------------------- Troubleshooting & Tips for NetworkManager
WiFi can scan, but not connect using NetworkManager (Debian 9 Stretch) WiFiはスキャンできますが、NetworkManager(Debian 9 Stretch)を使用して接続することはできません
If you find that your wireless network device can scan, but will not complete connecting, try turning off MAC address randomization. ワイヤレスネットワークデバイスがスキャンできるが接続が完了しない場合は、MACアドレスのランダム化をオフにしてみてください。
[device] wifi.scan-rand-mac-address=no After doing this, restart NetworkManager with service NetworkManager restart 0632名無しQ(・∀・)ノ゜サァン!!2021/08/29(日) 14:59:37.68ID:Eq/Hf/SL バスター
In recent years, NetworkManager is sophisticated enough to set up a WiFi hotspot that "just works" (i.e. sets up a local private net, with DHCP and IP forwarding). 近年、NetworkManagerは、「正常に機能する」WiFiホットスポットをセットアップするのに十分なほど洗練されています(つまり、DHCPとIP転送を使用してローカルプライベートネットをセットアップします)。
Alternatively, it can be created manually with a command similar to: または、次のようなコマンドを使用して手動で作成することもできます。
nmcli dev wifi hotspot ifname wlp4s0 ssid test password "test1234" 0633名無しQ(・∀・)ノ゜サァン!!2021/08/29(日) 15:12:48.53ID:Eq/Hf/SL スマートフォンをモバイル・ホットスポットとして使用する
ホットスポットがない場所にいるときに、ノートブック PC をインターネットに接続する必要がある場合は、「テザリング」というプロセスを通じて、スマートフォンをモバイル Wi-Fi* ホットスポットとして使用できます。これにより、ノートブック PC からインターネットにアクセスし、スマートフォンのデータ接続を共有できます。
nmcli dev wifi hotspot ifname wlan0 ssid test password "test1234"
$ LANG=C
$ nmcli dev wifi hotspot ifname wlan0 ssid test password "test1234" Error: Invalid 'password': 'test1234' is not valid WEP key (it should be 5 or 13 ASCII chars).
$ nmcli dev wifi hotspot ifname wlan0 ssid test password "test4" Error: Connection activation failed: (11) 802.1X supplicant took too long to authenticate.
$ nmcli dev wifi hotspot ifname wlan0 ssid test password "test4" エラー: 接続のアクティベーションに失敗しました: (11) 802.1X サプリカントの認証に時間がかかり過ぎました. 0634名無しQ(・∀・)ノ゜サァン!!2021/08/29(日) 15:28:37.78ID:Eq/Hf/SL #: ../src/libnmc-base/nm-client-utils.c:372 msgid "802.1X supplicant took too long to authenticate" msgstr "802.1X サプリカントの認証に時間がかかり過ぎました"
nmcli dev wifi hotspot ifname wlan0 ssid test password "test1234"
pwには8文字が必要です
jin@kyo:~$ nmcli dev wifi hotspot ifname wlan0 ssid test password "test1" エラー: 接続のアクティベーションに失敗しました: (11) 802.1X サプリカントの認証に時間がかかり過ぎました. jin@kyo:~$
"802.1X supplicant took too long to authenticate." 英語版のエラーテキスト-「802.1Xサプリカントの認証に時間がかかりすぎました。」 0635名無しQ(・∀・)ノ゜サァン!!2021/08/29(日) 18:21:30.07ID:Eq/Hf/SL Changing the backend バックエンドの変更 It's possible to replace wpa_supplicant with IWD in NetworkManager in Debian 10 and newer, though Debian 11 is recommended for the best experience as there are known issues with the old version of IWD present in Debian 10.
While also available as backend for ConnMan, NetworkManager, and systemd-networkd, it's also possible to nearly base your entire networking stack on one codebase with IWD alone.
It has virtually zero dependencies and uses modern kernel features as often as possible. 依存関係は事実上ゼロであり、可能な限り最新のカーネル機能を使用します。
Anecdotal reports suggest that it's much faster to connect to networks than wpa_supplicant, and has better roaming support, among other perceived improvements.
n@RY:~$ sudo iw dev wlan0 get power_save command failed: No such device (-19) n@RY:~$ 0660名無しQ(・∀・)ノ゜サァン!!2021/08/30(月) 19:35:41.57ID:iwptgfRo ブルズアイで省電力効いてると思ってたが、今見たら効いてない
*** Raspberry Pi wifi driver installer by MrEngman. *** Performing self-update *** Relaunching after update
*** Raspberry Pi wifi driver installer by MrEngman.
Your current kernel revision = 4.19.0-17-amd64+ Your current kernel build = #1
Checking for a wifi module to determine the driver to install.
Your wifi module is Bus 004 Device 002: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
And it uses the 8188eu driver.
Your Pi revision number is Processor type unknown - you do not appear to be running this script on a Raspberry Pi. Exiting the script jin@kyo:~$ 0666名無しQ(・∀・)ノ゜サァン!!2021/08/31(火) 02:01:19.18ID:6VuYlQLl すごい...パワーマネージメントon になった。消えた。!!
$ ip a 以前と変化なし。 0667名無しQ(・∀・)ノ゜サァン!!2021/08/31(火) 02:11:13.55ID:6VuYlQLl>>626 > めったにないが、期待通りに。11においては、tplink子機省電力。ということは、10の設定。これは至急直したい。 > > 10へ
...これはなんだ?
名前:名無しQ(・∀・)ノ゜サァン!! [sage]: 2021/08/30(月) 19:35:41.57 ID:iwptgfRo (15) ブルズアイで省電力効いてると思ってたが、今見たら効いてない 0668名無しQ(・∀・)ノ゜サァン!!2021/08/31(火) 02:27:17.08ID:6VuYlQLl Your staging driver does not support MAC80211 and that's what wpa_supplicant defaults to. ステージングドライバーはMAC80211をサポートしておらず、これがwpa_supplicantのデフォルトです。
It probably works if you start wpasupplicant like this: このようにwpasupplicantを開始すると、おそらく機能します。
nl80211: Driver does not support authentication/association or connect commands
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
rfkill: Cannot get wiphy information
ioctl[SIOCSIWAP]: Operation not permitted ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument
ctrl_iface exists and seems to be in use - cannot override it
Delete '/run/wpa_supplicant/wlan0' manually if it is not used anymore
Failed to initialize control interface '/run/wpa_supplicant'.
You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
n@RY:~$ sudo update-grub [sudo] n のパスワード: Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-7-amd64 Found initrd image: /boot/initrd.img-5.10.0-7-amd64 Adding boot menu entry for EFI firmware configuration done n@RY:~$
----------------------- 2,Put the debian bootloader in /boot/efi and create an appropriate entry in the computer NVRAM
grub-install
n@RY:~$ sudo grub-install Installing for x86_64-efi platform. Installation finished. No error reported. n@RY:~$
3,Re create a grub config file based on your disk partitioning schema
update-grub
n@RY:~$ sudo update-grub Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-7-amd64 Found initrd image: /boot/initrd.img-5.10.0-7-amd64 Adding boot menu entry for EFI firmware configuration done n@RY:~$
4,You should check afterwards that: その後、次のことを確認する必要があります。
Check 1. the bootloader is existing in /boot/efi/EFI/debian/grubx64.efi チェック1.ブートローダーが/boot/efi/EFI/debian/grubx64.efiに存在する
$ file /boot/efi/EFI/debian/grubx64.efi
/boot/efi/EFI/debian/grubx64.efi: PE32+ executable (EFI application) x86-64 (stripped to external PDB), for MS Windows
チェック!
Check 2. the nvram entry was properly created. チェック2.nvramエントリが正しく作成されました。
$ You can now reboot, and Grub should greet you. これで再起動でき、Grubがあなたに挨拶するはずです。 0689名無しQ(・∀・)ノ゜サァン!!2021/09/01(水) 22:36:45.19ID:72mL2I5d>>688 バスター。従来わからないから、refind と混在させてた。 sudo apt-get install --reinstall grub-efi sudo grub-install sudo update-grub
$ sudo file /boot/efi/EFI/debian/grubx64.efi /boot/efi/EFI/debian/grubx64.efi: PE32+ executable (EFI application) x86-64 (stripped to external PDB), for MS Windows
Removing the data stored by firefox involves deleting files created by Firefox in the root directories. Firefoxによって保存されたデータを削除するには、Firefoxによって作成されたルートディレクトリ内のファイルを削除する必要があります。 You can do this via the terminal without any need for GKSu. これは、GKSuを必要とせずにターミナル経由で実行できます。
<<すべて必要ない 0725名無しQ(・∀・)ノ゜サァン!!2021/09/07(火) 12:03:31.43ID:y/Z0WQSQ AMDInstallUEP.exe file information
The process known as AMDInstallUEP belongs to software Branding64 by unknown. [ AMDInstallUEPとして知られるプロセスは、不明なソフトウェアBranding64に属しています。]
Description: AMDInstallUEP.exe is not essential for the Windows OS and causes relatively few problems. [ 説明:AMDInstallUEP.exeはWindows OSに必須ではなく、比較的少ない問題を引き起こします。] The AMDInstallUEP.exe file is located in a subfolder of "C:\Program Files" (for example C:\Program Files\AMD\InstallUEP\). [ AMDInstallUEP.exeファイルは、「C:\\ ProgramFiles」のサブフォルダー(たとえば、C:\\ Program Files \\ AMD \\ InstallUEP \\)にあります。] The file size on Windows 10/8/7/XP is 2,356,736 bytes. [ Windows 10/8/7 / XPのファイルサイズは2,356,736バイトです。] https://www.file.net/process/amdinstalluep.exe.html [ https://www.file.net/process/amdinstalluep.exe.html] The program has a visible window. [ プログラムには表示可能なウィンドウがあります。] The file is not a Windows core file. [ このファイルはWindowsコアファイルではありません。] There is no description of the program. [ プログラムの説明はありません。] AMDInstallUEP.exe is a Windows scheduled tasks. [ AMDInstallUEP.exeは、Windowsのスケジュールされたタスクです。] AMDInstallUEP.exe is able to manipulate other programs. [ AMDInstallUEP.exeは、他のプログラムを操作することができます。] Therefore the technical security rating is 36% dangerous. [ したがって、技術的なセキュリティ評価は36%危険です。] Uninstalling this variant: You can do the following: [ このバリアントのアンインストール:次の操作を実行できます。] 1) uninstall Branding64 software via Windows Control Panel/Add or Remove Programs (Windows XP) or Programs and Features (Windows 10/8/7) [ 1)Windowsのコントロールパネル/プログラムの追加と削除(Windows XP)またはプログラムと機能(Windows 10/8/7)を介してBranding64ソフトウェアをアンインストールします。] 2) visit the vendor's support site. [ 2)ベンダーのサポートサイトにアクセスします。]
A clean and tidy computer is the key requirement for avoiding problems with AMDInstallUEP. クリーンで整頓されたコンピューターは、AMDInstallUEPの問題を回避するための重要な要件です。 This means running a scan for malware, cleaning your hard drive using 1cleanmgr and 2sfc /scannow, 3uninstalling programs that you no longer need, checking for Autostart programs (using 4msconfig) and enabling Windows' 5Automatic Update. これは、マルウェアのスキャンを実行し、<< グループポリシーで無効 << 未構成に
とにかくキンドルの時もそうだけど、日本語ローカルよくないことばかり 0743名無しQ(・∀・)ノ゜サァン!!2021/09/08(水) 20:35:15.42ID:2aRJg9OG ウインへ戻りロゼッタ続き。 0744名無しQ(・∀・)ノ゜サァン!!2021/09/08(水) 20:36:43.97ID:2aRJg9OG ドクター云わく「リナックスの先達としてリナックスのことのみ話す」 他のことはいっさい返事しない。これを先生の教えと拝して実行してみる。 0745名無しQ(・∀・)ノ゜サァン!!2021/09/08(水) 20:49:32.30ID:2aRJg9OG Is it OK to have multiple browsers installed?
Unlike security software, it's ok to have multiple browsers installed on your computer and in fact, it's a really good idea to have at least two different browsers installed. ... セキュリティソフトウェアとは異なり、コンピュータに複数のブラウザをインストールしても問題ありません。実際、少なくとも2つの異なるブラウザをインストールすることをお勧めします。 ..。
When you are experiencing slow or no connection, switching to another browser can quickly help you track down the problem. 接続が遅い、または接続がない場合は、別のブラウザに切り替えると、問題をすばやく特定できます。2010/09/13 0746名無しQ(・∀・)ノ゜サァン!!2021/09/08(水) 20:51:35.91ID:2aRJg9OG How many browsers can I have?
You can have as many browsers as you like installed on your system, but only one of them can be the default. システムには必要な数のブラウザをインストールできますが、デフォルトにできるのはそのうちの1つだけです。
That doesn't mean you can't use the others, it just means you need to explicitly run those browsers in order to. これは、他のブラウザを使用できないことを意味するのではなく、使用するためにそれらのブラウザを明示的に実行する必要があることを意味します。
For the record, I usually have three or four browsers on my machines. ちなみに、私は通常、自分のマシンに3つまたは4つのブラウザーを持っています。 0747名無しQ(・∀・)ノ゜サァン!!2021/09/09(木) 11:54:14.58ID:jM5We93u Rosetta Stone 4.5.5(PC)とInstall.exeのサイズがぜんぜん違う。120メガと98メガ。 前者はロゼッタバージョン4で2011年。後者はロゼッタ5で2014。動画を見ると5.0.3くらい。
「動画の再生環境が不安定、直しておく」 Media Player ClassicはダウンロードしたZIPファイルを解凍し、フォルダー内の「mplayerc.exe」ファイルをクリックして起動します。インストール作業の必要がなく、 実行ファイルから瞬時に起動できる点が特徴です
The folder "C:\Windows\vpnplugins" is where Metro and Modern apps are stored. フォルダ「C:\\ Windows \\ vpnplugins」は、MetroおよびModernアプリが保存されている場所です。 Metro and Modern apps are in the same category of apps as "Windows store" and "file manger" which are equally important components of the Windows operating system. MetroアプリとModernアプリは、Windowsオペレーティングシステムの同様に重要なコンポーネントである「Windowsストア」および「ファイルマネージャー」と同じカテゴリのアプリです。 If windows add or remove features doesn't remove them, they cannot be removed. Windowsが機能を追加または削除しても機能が削除されない場合、それらを削除することはできません。 0750名無しQ(・∀・)ノ゜サァン!!2021/09/09(木) 12:26:05.00ID:jM5We93u ぜんぶいらんっ。腹立った。一時的に不安定にフォトでいい。 0751名無しQ(・∀・)ノ゜サァン!!2021/09/09(木) 15:04:46.56ID:jM5We93u 意外な解決法にしてもっとも確実なソリューション。ブラウザで再生。 0752名無しQ(・∀・)ノ゜サァン!!2021/09/10(金) 01:25:11.78ID:d0dIX7hX バスターのワインで .baiduyun.p.downloadingのサフィックスを削除 中国 .baiduyun.p.downloading いぜん、英語しかうまくいかなかった。元ファイルが不完全なのかも。英語で。 どちらもダメ。 復元して 1,ネット切断最初から、最初のセットアップを完全に 2,4から試す。 0753名無しQ(・∀・)ノ゜サァン!!2021/09/10(金) 01:42:06.79ID:d0dIX7hX 1,ネット切断最初から、最初のセットアップを完全に
https://appdb.winehq.org/objectManager.php?sClass=version&iId=33744 を読むとワイン固有の問題がありそうだ。ウインへ。 0754名無しQ(・∀・)ノ゜サァン!!2021/09/10(金) 02:30:50.32ID:d0dIX7hX Error 9123 occurs if the installed application version is not up to date. You can find the full troubleshooting steps here Questions Rosetta Stone Community
Posted on Dec 27, 2014 0755名無しQ(・∀・)ノ゜サァン!!2021/09/10(金) 02:54:30.20ID:d0dIX7hX 質問:RosettaStone言語学習ソフトウェアv4.1.15
C:\Program Files\rosettastoneltdservices\datainstaller.dll 0756名無しQ(・∀・)ノ゜サァン!!2021/09/10(金) 03:59:31.93ID:d0dIX7hX b. Windows ファイアウォールでロゼッタストーンをブロックします。コントロールパネル」→ 「Windows ファイアウォール」→「詳細設定」を選択します。左パネルの「受信の規則」を選択します。ロゼッタストーンが表示されるまで下にスクロールします。2つのサービスがあるはずです。それぞれのサービスを右クリックし、プロパティを選択します。 全般」タブの「アクション」で「接続をブロックする」を選択します。アウトバウンドルールでも同じ操作を行います。
>> user@debian:/media/user/98d2193c-b09e-4f8b-b78d-dc9ff9906263/ timeshift-btrfs/snapshots/2021-09-13_21-17-29$ sudo btrfs sub snap @ / media/user/debian/@ ERROR: cannot access '/media/user/debian': No such file or directory
user@debian:/media/user/98d2193c-b09e-4f8b-b78d-dc9ff9906263/timeshift -btrfs/snapshots/2021-09-13pshots/2021-09-13_21-17-29$ sudo btrfs sub snap @ /media/user/98d2193c-b09e-4f8b-b78d-dc9ff9906263/@ sudo btrfs sub snap @ /media/user/98d2193c-b09e-4f8b-b78d- dc9ff9906263/@ Create a snapshot of '@' in '/media/user/98d2193c-b09e-4f8b-b78d- dc9ff9906263/@/@' ERROR: cannot snapshot '@': Read-only file system
------------------------------------------------- Read-only file system の問題。この後解決できず。 ------------------------------------------------- 0808名無しQ(・∀・)ノ゜サァン!!2021/09/18(土) 06:26:22.93ID:aSRoT76y 復元したい日付のディレクトリへ入り、
$ sudo btrfs sub snap @home /media/user/debian/@home $ poweroff で、ライブメディアを外して電源を入れてみる
たぶん、この情報だけでいける。 --------------------------------------------------------- これが当初の大方針。 0809名無しQ(・∀・)ノ゜サァン!!2021/09/18(土) 06:26:29.18ID:aSRoT76y > If you can mount (even read-only) you can also copy files to another device.
Device Boot Start End Sectors Size Id Type /dev/sda1 2048 264191 262144 128M c W95 FAT32 (LBA) /dev/sda2 264192 312576704 312312513 148.9G 83 Linux user@debian:~$
parted /dev/sda
user@debian:~$ sudo parted /dev/sda GNU Parted 3.4 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p
Model: ATA ST3160815AS (scsi) Disk /dev/sda: 160GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags:
Number Start End Size Type File system Flags 1 1049kB 135MB 134MB primary fat32 lba 2 135MB 160GB 160GB primary btrfs
There can be several reasons why your OS can’t read the superblock on your HDD. OSがHDDのスーパーブロックを読み取れない理由はいくつか考えられます。
1. The HDD is dropped to the ground and the superblock is damaged. HDDが地面に落ち、スーパーブロックが損傷しています。 This is usually physical damage to the corresponding sectors on the disk. これは通常、ディスク上の対応するセクターへの物理的な損傷です。
2. There’s a sudden power outage. 突然の停電があります。 Because the superblock is cached in RAM, if a power outage happens, there might be important changes to the superblock that hasn’t been written to the disk. スーパーブロックはRAMにキャッシュされるため、停電が発生した場合、 ディスクに書き込まれていないスーパーブロックに重要な変更が加えられる可 能性があります。
<< my cace is NO.2 . 0813名無しQ(・∀・)ノ゜サァン!!2021/09/18(土) 06:30:43.13ID:aSRoT76y can't read superblock
We need to recover the bad superblock from backup copies. バックアップコピーから不良スーパーブロックを回復する必要があります。 The following instructions show how to recover superblock for ext4 and Btrfs file system. 次の手順は、ext4およびBtrfsファイルシステムのスーパーブロックを回復す る方法を示しています。
My HDD is an external hard disk. 私のHDDは外付けハードディスクです。 If the damaged filesystem is your root file system, you need to boot your computer from a Linux Live USB stick. 破損したファイルシステムがルートファイルシステムである場合は、Linux LiveUSBスティックからコンピューターを起動する必要があります。 ------------------------------------------- Recover superblock on btrfs filesystem Find out the device name of the damaged partition.
sudo parted -l
user@debian:~$ sudo parted -l Model: ATA ST3160815AS (scsi) Disk /dev/sda: 160GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags:
Number Start End Size Type File system Flags 1 1049kB 135MB 134MB primary fat32 lba 2 135MB 160GB 160GB primary btrfs 0814名無しQ(・∀・)ノ゜サァン!!2021/09/18(土) 06:32:57.69ID:aSRoT76y Then run the following command to recover superblock.
user@debian:~$ sudo btrfs rescue super-recover -v /dev/sda No valid Btrfs found on /dev/sda Usage or syntax errors
user@debian:~$ sudo btrfs rescue super-recover -v /dev/sda2 All Devices: Device: id = 1, name = /dev/sda2
Before Recovering: [All good supers]: device name = /dev/sda2 superblock bytenr = 65536
device name = /dev/sda2 superblock bytenr = 67108864
[All bad supers]:
All supers are valid, no need to recover -------------------------------------------------------------------- If it tells you “All supers are valid, no need to recover”, then check the syslog. 「すべてのスーパーが有効で、回復する必要はありません」と表示された場合 は、syslogを確認してください。
You might find the following message, which indicates the log tree is corrupted, so it can’t replay the log. 次のメッセージが表示される場合があります。これは、ログツリーが破損して いるため、ログを再生できないことを示しています。
Now you should be able to mount your Btrfs file system.>>> OHHHHHHHHHH !! マウントできたっ 0816名無しQ(・∀・)ノ゜サァン!!2021/09/18(土) 21:39:32.38ID:/7EfHAB3 1. まず二つhddつなげて、ディスクでシーゲイトのスマート計測 0817名無しQ(・∀・)ノ゜サァン!!2021/09/18(土) 22:15:07.88ID:/7EfHAB3 160GBは死んでいない、ぎりオッケー
dmesg を見る。/dev/sda2 の。そしてそのエラーメッセージをググる。 食事後。 0818名無しQ(・∀・)ノ゜サァン!!2021/09/19(日) 11:32:26.94ID:6ZO0jQ9p [1758248.955796] systemd-journald[743]: Failed to rotate /var/log/journal/4682ff87681c483b92e83a97ee93503f/system.journal: Read-only file system
ジャーナルファイルを手動で消去 journal のファイルは /var/log/journal に存在します。rm で消去することもできますが、journalctl を使って消去することも可能です。例: $ su パスワード: root@kyo:/home/jin# journalctl --vacuum-size=100M Vacuuming done, freed 0B of archived journals from /run/log/journal/10eba72ba6e245b4a648c25e2c8d51d5. root@kyo:/home/jin#
Seagate Bootable Tools なんか知らんけど使う 0820名無しQ(・∀・)ノ゜サァン!!2021/09/19(日) 11:50:04.61ID:6ZO0jQ9p The other file in the ZIP download is SeaToolsBootable_RC_2.1.2.usbBootMaker.exe. ZIPダウンロードの他のファイルはSeaToolsBootable_RC_2.1.2.usbBootMaker.exeです。 This is a Windows executable file which formats a USB Flash drive you provide. これは、提供するUSBフラッシュドライブをフォーマットするWindows実行可能ファイルです。 It copies over all the files needed to use it as a bootable device for the SeaTools Bootable diagnostic software. SeaToolsブータブル診断ソフトウェアのブータブルデバイスとして使用するために必要なすべてのファイルをコピーします。 All data on the USB Flash drive will be erased so be sure to protect any valuable files. USBフラッシュドライブ上のすべてのデータが消去されるため、貴重なファイルを必ず保護してください。
SeaTools Bootable tests SATA and USB interface drives. SeaTools Bootableは、SATAおよびUSBインターフェイスドライブをテストします。 All of the Basic Tests are data safe. すべての基本テストはデータセーフです。 The Advanced Features menu has Full Erase which is not data safe. Advanced Featuresメニューには、データセーフではない完全消去があります。 0821名無しQ(・∀・)ノ゜サァン!!2021/09/19(日) 12:36:50.14ID:6ZO0jQ9p C:\Windows\system32>diskpart
Microsoft DiskPart バージョン 6.3.9600
Copyright (C) 1999-2013 Microsoft Corporation. コンピューター: G
:~/Downloads$ sudo apt install '/home/jin/Downloads/microsoft-edge-beta_94.0.992.23-1_amd64.deb' パッケージリストを読み込んでいます... 完了 依存関係ツリーを作成しています 状態情報を読み取っています... 完了 注意、'/home/jin/Downloads/microsoft-edge-beta_94.0.992.23-1_amd64.deb' の代わりに 'microsoft-edge-beta' を選択します 以下のパッケージが新たにインストールされます: microsoft-edge-beta アップグレード: 0 個、新規インストール: 1 個、削除: 0 個、保留: 3 個。 115 MB 中 0 B のアーカイブを取得する必要があります。 この操作後に追加で 383 MB のディスク容量が消費されます。 取得:1 /home/jin/Downloads/microsoft-edge-beta_94.0.992.23-1_amd64.deb microsoft-edge-beta amd64 94.0.992.23-1 [115 MB] /tmp/timeshift-autosnap-apt-timestamp not found! Using lastSnapshot=0 Rsyncing /boot into the filesystem before the call to timeshift. Rsyncing /boot/efi into the filesystem before the call to timeshift. Using system disk as snapshot device for creating snapshots in BTRFS mode
/dev/sda2 is mounted at: /run/timeshift/backup, options: rw,relatime,space_cache,subvolid=5,subvol=/
Creating new backup...(BTRFS) Saving to device: /dev/sda2, mounted at path: /run/timeshift/backup Created directory: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-09-22_07-35-17 Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-09-22_07-35-17/@ Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-09-22_07-35-17/@home Created control file: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-09-22_07-35-17/info.json BTRFS Snapshot saved successfully (2s) Tagged snapshot '2021-09-22_07-35-17': ondemand ------------------------------------------------------------------------------ 以前に未選択のパッケージ microsoft-edge-beta を選択しています。 (データベースを読み込んでいます ... 現在 228510 個のファイルとディレクトリがインストールされています。) .../microsoft-edge-beta_94.0.992.23-1_amd64.deb を展開する準備をしています ... microsoft-edge-beta (94.0.992.23-1) を展開しています... microsoft-edge-beta (94.0.992.23-1) を設定しています ... update-alternatives: /usr/bin/microsoft-edge (microsoft-edge) を提供するために自動モードで /usr/bin/microsoft-edge-beta を使います menu (2.1.47+b1) のトリガを処理しています ... bamfdaemon (0.5.4-1) のトリガを処理しています ... Rebuilding /usr/share/applications/bamf-2.index... desktop-file-utils (0.23-4) のトリガを処理しています ... mime-support (3.62) のトリガを処理しています ... man-db (2.8.5-2) のトリガを処理しています ... localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB
# btrfs subvolume list -p . ID 3708 gen 249502 parent 5 top level 5 path @home ID 3709 gen 249502 parent 5 top level 5 path @ ID 3716 gen 249254 parent 5 top level 5 path timeshift-btrfs/snapshots/2021-09-22_08-10-37/@ ID 3717 gen 248879 parent 5 top level 5 path timeshift-btrfs/snapshots/2021-09-22_08-10-37/@home ID 3718 gen 249254 parent 5 top level 5 path timeshift-btrfs/snapshots/2021-09-22_08-15-27/@ ID 3719 gen 247945 parent 5 top level 5 path timeshift-btrfs/snapshots/2021-09-22_08-15-27/@home ID 3720 gen 249254 parent 5 top level 5 path timeshift-btrfs/snapshots/2021-09-23_07-33-54/@ ID 3721 gen 248659 parent 5 top level 5 path timeshift-btrfs/snapshots/2021-09-23_07-33-54/@home ID 3876 gen 249472 parent 5 top level 5 path timeshift-btrfs/snapshots/2021-09-24_16-22-15/@ ID 3877 gen 249473 parent 5 top level 5 path timeshift-btrfs/snapshots/2021-09-24_16-22-15/@home 0832名無しQ(・∀・)ノ゜サァン!!2021/09/24(金) 16:56:59.65ID:CBmf8KSl 休憩して、フォへ 0833名無しQ(・∀・)ノ゜サァン!!2021/09/26(日) 12:51:50.56ID:I/yJF3V6 犬小のまとめ。煽っているのがえろ本人でも粘着でもどちらでもよい。
$ ls /run/timeshift/backup @ @home ST.img timeshift-btrfs
$ sudo btrfs scrub start /mnt scrub started on /mnt, fsid 98d2193c-b09e-4f8b-b78d-dc9ff9906263 (pid=1929)
<< scrub が一瞬にして終わり
$ watch sudo btrfs scrub status /mnt
$ Every 2.0s: sudo btrfs scrub status /mnt kyo: Sat Sep 25 13:17:40 2021
scrub status for 98d2193c-b09e-4f8b-b78d-dc9ff9906263 scrub started at Sat Sep 25 13:17:35 2021 and was aborted after 00:00:00 total bytes scrubbed: 0.00B with 0 errors
jin@kyo:~$ su - パスワード: # btrfs scrub start /mnt scrub started on /mnt, fsid 98d2193c-b09e-4f8b-b78d-dc9ff9906263 (pid=3123) # btrfs scrub status /mnt scrub status for 98d2193c-b09e-4f8b-b78d-dc9ff9906263 scrub started at Sat Sep 25 13:22:42 2021 and was aborted after 00:00:00 total bytes scrubbed: 0.00B with 0 errors # これは復旧したら相談。ここまで、あとは最低hdd を 0847名無しQ(・∀・)ノ゜サァン!!2021/09/26(日) 13:56:52.59ID:I/yJF3V6 $ sudo timeshift --list Mounted '/dev/sda2' at '/run/timeshift/backup'
$ ls /run/timeshift/backup @ @home ST.img timeshift-btrfs
$ sudo btrfs scrub start /mnt scrub started on /mnt, fsid 98d2193c-b09e-4f8b-b78d-dc9ff9906263 (pid=1929)
<< scrub が一瞬にして終わり、
$ watch sudo btrfs scrub status /mnt
$ Every 2.0s: sudo btrfs scrub status /mnt kyo: Sat Sep 25 13:17:40 2021
scrub status for 98d2193c-b09e-4f8b-b78d-dc9ff9906263 scrub started at Sat Sep 25 13:17:35 2021 and was aborted after 00:00:00
<< この行からまったくスクラブしてないことが読み取れる
total bytes scrubbed: 0.00B with 0 errors 0849名無しQ(・∀・)ノ゜サァン!!2021/09/26(日) 14:03:25.47ID:I/yJF3V6 :~$ su - パスワード: # btrfs scrub start /mnt scrub started on /mnt, fsid 98d2193c-b09e-4f8b-b78d-dc9ff9906263 (pid=3123)
# btrfs scrub start / scrub started on /, fsid cf82c300-5af6-45d6-a682-1e93b9105cae (pid=16767) # # btrfs scrub status / # btrfs scrub status / scrub status for cf82c300-5af6-45d6-a682-1e93b9105cae scrub started at Sun Sep 26 18:23:37 2021, running for 00:00:55 total bytes scrubbed: 3.51GiB with 0 errors # 0857名無しQ(・∀・)ノ゜サァン!!2021/09/26(日) 18:59:59.71ID:I/yJF3V6 scrub 実行中はスタンバイに入れない、chkdsk も同じだった 0858名無しQ(・∀・)ノ゜サァン!!2021/10/05(火) 17:40:42.50ID:kRLpiKrT 1. sda 149.1G ST3160815ASを繋いだマシンをdebian LIVE USBでブートし、GPartedでGPTテーブルを書き込む (まだ退避すべきデータがあるなら事前に退避しておく) << 退避ずみ
「死ぬ気でWindowsに寄せたディストリ」「死ぬ気でMacに寄せたディストリ」を作れば一気にブレイクすると思うんですけど。。 0865名無しQ(・∀・)ノ゜サァン!!2021/10/06(水) 12:31:58.11ID:7pfF8Isr 参考になった。つまりブルズアイ安定版のmate を入れて、(1からメール参考にカスタマイズ工程を復習) 0866名無しQ(・∀・)ノ゜サァン!!2021/10/06(水) 22:29:34.67ID:7pfF8Isr Is GPT or MBR better for linux?
For linux it does not matter to which type of partitions install (logical or primary). Linuxの場合、インストールするパーティションのタイプ(論理またはプライマリ)は関係ありません。
But with GPT it may be slightly more handy to move partitions if needed, because they will all be primary. ただし、GPTを使用すると、パーティションがすべてプライマリになるため、必要に応じてパーティションを移動する方が少し便利な場合があります。
There is no performance difference at all. パフォーマンスの違いはまったくありません。
All other "advantages" of GPT are so minor, that it is not worth to mention.May 28, 2015 GPTの他のすべての「利点」は非常に小さいため、言及する価値はありません。2015年 0867名無しQ(・∀・)ノ゜サァン!!2021/10/06(水) 22:33:48.47ID:7pfF8Isr in@kyo:~$ sudo gdisk -l /dev/sda GPT fdisk (gdisk) version 1.0.3